Revit Saros, textile jacket

Revit Saros, textile jacket

Article No.: 11085674

What better way to express yourself than through bold, graphic prints on your riding jacket, That’s exactly what the Saros was created for. The same jacket with three different illustrative print choices allows you to be your best (and protected self) out on the road.

Tech fashion in practice

The hooded Saros jacket is meant to look more like veritable streetwear rather than personal protective equipment. The 3L softshell contributes to this dynamic. That said, it’s totally ready to take on the road thanks to the inclusion of inner SEESMART elbow and shoulder protection, along with a AA classification. While the jacket itself is windproof - not waterproof – the inner membrane does help to prevent water pickup.

Three ways to express your style

Each Saros jacket comes with the same safety features but a different look to them. And instead of just changing up the colors, Revit offers them in three different prints. There’s the non-traditional camo green variation, a tonal mélange grey, and one that has names of various places famous racetracks are in.

Features

• Regular fit
• Inner pocket
• Two stash pockets at front
• Adjustment drawcord at hood
• Button fixation for hood
• Fixed hood
• Jeans loop
• Knitted cuff
• Short connection zipper

Lining

• 3D mesh
• Mesh

Outer material

• Softshell 3L

Insulation

• WindBarrier®
• Wind catcher behind front zipper

Visibility

• Laminated reflection at front
• Laminated reflection on hood

Safety

• Prepared for SEESOFT level 2 Insert Back Protector
• SEESMART level 1 Elbow Protectors
• SEESMART level 1 Shoulder Protectors
• Thumb loops
• Certified according to protection standard EN 17092-3:2020, class AA

wash & care

• Machine wash 30°C, mild cycle
• Do not bleach
• Do not tumble dry
• Do not iron
• Do not dry-clean

Warnings

• Do not use softener
• Refer to the user manual

Regular fit

The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.

Button fixation for hood

Thanks to the Button fixation, the hood stays in place during the ride, preventing the wind from reaching the inside of the hood.

Jeans loop

The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.

Knitted cuff

The knitted cuffs block wind to keep you warm and comfortable.

WindBarrier®

The REV’IT! WindBarrier® membrane is laminated between two separate layers of fabric: a stretchable outer layer, and a soft fleece inner layer. This combination blocks against wind and helps repel water. Stopping the wind and rain helps prevent hypothermia, and improves a rider’s level of comfort and warmth.

Wind catcher behind front zipper

Behind the front, a panel has been installed to block the wind.

Prepared for SEESOFT level 2 Insert Back Protector

The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT level 2 back protector insert Type RV - an easy upgrade to maximize safety.

SEESMART™ protectors

SEESMART™ protectors offer maximum flexibility. At the same time, they fulfill impact tests according to EN 1621-1:2012 Level 1 at both normal and high (T+) ambient temperatures.

Laminated reflection

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.