Revit Control H2O, textile jacket waterproof

Revit Control H2O, textile jacket waterproof

Article No.: 11085676

For sport street riders looking for a waterproof jacket (with ventilation) that also want the aesthetic of speed wrapped into a class AA jacket, Revit brings you the Control H2O.

Its own vibe

When Revit created the Control H2O jacket, they had a very distinct vision. It was to be the seamless blending of both motorsport (think hard parts at the shoulders) and sportswear (think lamination around the zippers and tonal graphic prints). And unlike in the past - where any item in a “family” of jackets/pants/one-pieces - echoed almost identical aesthetics, Revit did something new. The Control H2O jacket is not a direct copy of leather series (jacket and one-piece suit); however, they took the graphics story of the ergonomic gradient shapes built out of diamonds and applied it in its own unique way on the chest panels and upper arms. This way, it’s immediately recognizable as a member of the “Control” series, but with its own fashion-focused twist.

Every(rainy)day functionality

For the days when the rain is coming down, you’re covered. The Control H2O jacket comes with the hydratex|Mesh G-liner construction along with a detachable thermal liner (to keep the cold away when necessary). And when the sun is out, and you need to breathe a bit more, take the liner out and open the exhaust vents on the lower sleeves and upper back.

Features

• Fit – Regular fit
• Adjustment strap at waist
• Adjustment tab at upper arm
• Inner pocket within thermal liner
• Two slit pockets on front
• Jeans loop
• Short connection zipper
• Soft edge at collar
• For extra comfort, the inside of the collar is covered with a soft fabric.
• V-flap at cuff

Visibility

• Laminated reflective logo on back

Outer shell material

• High density polyester 600D
• Polyester ripstop
• Softshell 3L

Lining

• Mesh

Waterproofing

• hydratex|Mesh G-liner

Insulation

• Detachable thermal liner
• Wind & water catcher behind front zipper

Ventilation

• Air outlet on upper back
• Zippers on lower arms
• Protection in this product

Protection

• 3D mesh protector pockets
• Prepared for SEESOFT level 2 Insert Back Protector
• SEESMART level 1 Elbow Protectors
• SEESMART level 1 Shoulder Protectors
• TPU protection at shoulder
• Certified according to standard 17092:2020, protection class AA

Regular fit

Regular fit means a high level of comfort and adapts to different body shapes and sizes, but is not considered loose. It does not emphasize the user's figure but falls around the body.

Inner pocket in thermal lining

The inner pocket in the thermal lining provides additional storage space so you can keep personal items close to you.

Jeans loop

With the loop on the back, the jacket can be connected to your jeans and therefore does not ride up, making riding with your bare back a thing of the past.

High density polyester 600D

Thicker and finer polyester yarns are woven together in this fabric. This creates a very dense fabric that increases protection and abrasion resistance.

Polyester ripstop

Polyester yarns woven into a ripstop fabric. Thick reinforcing threads are woven into the fabric at regular intervals in a cross-hatch pattern known as ripstop.

Short connection zipper

Its job is to create a secure connection between your pants/jeans and your jacket/shirt. The jacket cannot ride up and your back remains covered in all situations.

Soft collar edge

The inside of the collar is lined with a soft fabric for greater comfort.

hydratex|Mesh G-Liner

The 100% waterproof hydratex|G-Liner coating is located on the mesh lining of the garment. The seams are sealed, making it totally waterproof. This maximizes wearing comfort and at the same time ensures the functional properties of the G-Liner construction.

Prepared for SEESOFT level 2 back protector

The back pocket in this REV’IT! Piece is tailor-made for the SEESOFT Level 2 back protector type RV - a simple upgrade for even more safety.

SEESMART™

SEESMART™ protectors offer maximum flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 Level 1 at both normal and high (T+) ambient temperatures.

High density polyester 600D

Thicker and finer polyester yarns are woven together in this fabric. This creates a very dense fabric that increases protection and abrasion resistance.

Laminated reflective logo on the back

This product features a reflective logo on the back of the garment to help motorcyclists be seen in low light, bad weather and/or at night.

Wash & care

Outershell

• Machine wash 30°C, mild cycle
• Do not bleach
• Do not tumble dry
• Do not iron
• Do not dry-clean

Warnings

• Do not use softener

Removable thermal liner

• Machine wash 30°C, mild cycle
• Do not bleach
• Do not tumble dry
• Do not iron
• Do not dry-clean

Warnings

• Do not use softener