Macna Synchrone, textile jacket waterproof

Other 1%,Polyamide 4%,Polyester 93%,Polyurethane 2%

The optimal configuration with three separately wearable jackets, developed for riders who want to brave all conditions.  

The Synchrone consists of a directly laminated waterproof shell, a breathable mesh core and a thermal liner. All jackets fit into each other and can be worn simultaneously. The thermal liner can be worn separately off-bike, whereas the shell and core are suited for the road. A Storage Bag is included to store layers you’re not using.

This construction provides the benefits of a 3-layer jacket without its disadvantages, such as the jacket becoming too wide and protectors floating around when layers are taken out. The DL shell doesn’t soak up water, which keeps it lightweight and makes it dry faster. When the temperature shifts, you can easily adjust your set-up by adding layers over the base jacket.

These layers are connected through our very own Easy Cuff™, a system that makes use of zips instead of loops and snaps, which prevents loose, floating layers inside your jacket. The mesh fabric in the core jacket forms another differentiator called Air Burst™. This construction takes in air to cool the body.

At the front of the collar you’ll find a Collar Loop™ that can keep the collar aside when you prefer not to close it. A Coat Hanger™ that is developed to carry the weight of a motorcycle jacket is fitted at the back. At the bottom of the main zip Macna opted for a reinforcement that makes zipping up easier. It’s called Zip Grip™.

Macna's RISC™ Level 2 impact protectors are present at the shoulders and elbows. RISC™ back and chest protectors are separately available and can be placed in the designated compartment with ease. Be sure to check the size table before purchasing a back protector.

If all of this isn’t enough, this jacket is also prepared for additional differentiators. At the upper back, you’ll find a pocket for Macna's Vision 2C LED light. The chest features two buckles to which our Vision Tech vest can be attached. The vest will stay in place when putting on or taking off the jacket.

Features

• Synthetic Nubuck, Stretch Mesh, 3D Mesh, Dynamic stretch, Ripstop and Neoprene outer
• Waterproof Raintex DL membrane
• Repelex DL fabric
• Detachable liner
• Twin Shell™
• Air Burst™
• Storage Bag
• Vision Tech vest prepared
• Vision 2C LED light prepared
• Adjustable strap lower arm
• Adjustable hip strap
• Adjustable strap upper arm
• Adjustable cuff
• Long connection zipper
• Zip Grip™
• Side Eye™
• RISC™ Level 2 shoulder and elbow protectors
• RISC™ chest protector prepared
• RISC™ back protector prepared
• Easy Cuff™
• Collar Loop™
• Electric Power Guide™
• Coat Hanger™
• Class AA certified according to EN17092

Synthetic Nubuck

Brushed synthetic leather which is soft, flexible, breathable and has the look of real suede.

Stretch Mesh

Elastic mesh with a fine knitted structure, made of polyester yarns combined with elastane which keeps the fabric lightweight and gives it flexibility, breathability and comfort.

3D Mesh

3D mesh offers a perfect combination of cushioning and good ventilation thanks to its open structure through which air can circulate very well.

Dynamic Stretch

Strong and durable double-weave fabric with Aramid yarns. The fabric has 4-way stretch for ease, comfort and a good fit. The fabric is coated, which makes it windproof and water-resistant.

Ripstop

Strong fabric with a fine squared pattern texture with reinforced yarns that makes the material stronger and very resistant to tearing. Different variants of ripstop are used in Macna’s riding gear, depending on the style and intended use of the garment.

Repelex DL

3-layer shell fabric with membrane and smooth surface. The fabric is waterproof, windproof, breathable, strong and lightweight.

Raintex DL

In some of Macna’s gear you’ll find a waterproof Raintex DL membrane, which means the waterproof membrane is laminated directly against the outer layer. This construction keeps water from penetrating membrane and outer layer, making it the best technique when it comes to waterproofing.

DL membranes prevent water from penetrating the outer layer and getting stuck between outer layer and membrane. This in turn prevents the garment from getting wet, soggy, and heavy. DL garments are also known to dry much faster than regular gear.

Air Burst™

Back in the day, you needed to open up your main zip if you wanted to cool down. Luckily, those days are over as Macna’s gear has been fitted with ventilation zips, panels and outlets for many years now. But sometimes, all those options still weren’t enough.

That’s why Macna evolved their mesh fabric to the next level, or actually another dimension all together. The third-dimension mesh fabric of Air Burst™ creates a breathable layer between the body and outside of the shell, which enables a better intake of cool air to cool the body. 3D mesh also slows you down gently and in one piece before your skin comes into contact with the road.

Vision 2C LED light prepared

Visibility boost in the form of a secondary tail light, fixed high upon your back.

Zip Grip™

Zipping up without gloves isn’t always a success at first try. Inserting one part into another turns out to be surprisingly difficult for the most intelligent species on the planet. Some of us even try this sport with their gloves on – with little success in most cases.

Macna’s Zip Grip™ is a triangular reinforcement at the base of the main zip. This reinforcement is easy to get a hold of and provides the needed grip when inserting. Zipping up has just become child’s play, even with gloves on!

Side Eye™

Reflective elements that remain discreet by day, implemented on the side to boost visibility. Night Eye's little brother.

R.I.S.C.™ Protectors

A garment can be fitted with Level 1 or Level 2 protectors, depending on which segment you’re going for. Level 2 protectors are thicker and heavier than Level 1, but in turn they provide better protection. Both levels of RISC protectors are interchangeable and separately available, so you can easily scale down or up if you’d like to.

R.I.S.C.™ Back Protector

You won’t find chest and back protectors in Macna’s garments – with exception of protective jackets such as the Korus and Whizzar – but they are separately available should you fancy extra protection. Make sure to check out the size table if you’re thinking about purchasing a Level 2 back protector.

R.I.S.C.™ Chest Protector

This unique protector is only available in Level 1 and consists of two separate pieces that automatically interlock after placing them in the designated compartments of your Macna jacket and zipping up.

Easy Cuff™

Loops and snaps that are supposed to neatly connect the separate layers of a jacket or pants. We all know how well that works; it doesn’t. Chances of your watch or foot getting stuck are ten times higher than of you actually putting on the garment without issues.

Make this issue a complaint of the past with Macna’s Easy Cuff™, a zip construction at the cuff that keeps the layers fixed and ensures a nice and tidy sleeve. The zip is located at the outside of the cuff, making it easily accessible when needed.

Collar Loop™

You’re about to reach your destination after a long ride and the difference in temperature is starting to get uncomfortable. You undo your collar, and your body heat rockets out of your jacket. A big relief, weren’t it for the fact your collar is now flapping around and – OUCH! – against your throat.

If you recognize this situation, you’re not the only one. Many did too, which was reason enough for Macna to come up with a Collar Loop™. This hook-and-clip system enables the collar to be zipped open and held aside instead of irritating you, providing ventilation without having to sacrifice your comfort.

Electric Power Guide™

EPG allows you to run power cables trough the inside of your jacket, offering you full movement and no bulk at the wrists. EPG prepared jackets feature loops to easily guide the power cable through the sleeves. With many battery options to choose from, there’s a solution for everybody.

Coat Hanger™

A motorcycle jacket often weighs (a lot) more than a regular jacket. You might notice it when wearing one, and maybe even more when taking it off and carrying it by the ‘coat hanger’ at the neck – which is often just a textile loop that eventually snaps due to the weight of your motorcycle jacket.

Macna’s Coat Hanger™ is specifically designed to carry the weight of your motorcycle jacket. This strong and durable handle is found at the neck, though they chose to place it on the outside to enable the jacket to dry and air better when stored on, for example, a coat rack.