Held Carese 3, textile jacket Gore-Tex

eVest & eVest PRO ready

The “Swiss Army knife” - Held CARESE 3 Top & Base, a combination that can do everything.

Features

• Cordura® RipStop 500D outer garment
• Breathable COOLMAX® mesh lining
• 3D Air-Mesh insert on the back
• Removable GORE-TEX liner with 3-layer technology, can be worn as rain protection in or over the jacket
• Reflective print

Comfort

• 2 waterproof outer pockets
• Back pocket
• 2 inner pockets
• Key pocket
• Document pocket
• Ventilation zippers in front, back, and arms
• Front zipper can also be used as ACS (Air Vent)
• Stretch inserts on the inner arm
• Stretch inserts on the elbow
• Velcro fastener at the cuffs
• Double arm width adjustment
• Waist belt
• Hip width adjustment
• eVest & eVest PRO ready
• Soft collar
• SnapTech retrofittable hood & collar system
• Held Drinkbag compatible

Safety

• Certified according to EN 17092:2020, protective clothing for motorcyclists
• D3O® T5 EvoProX soft protectors on shoulders and elbows, certified according to EN 1621-1:2012, Level 2
• Back protector retrofittable, certified according to EN 1621-2:2014
• Velcro for retrofittable chest protector
• Impact zones reinforced with special ripstop
• 3M Scotchlite™ reflective inserts
• Connection zipper

Cordura®

High-quality 100% polyamide fabric from DuPont made from cut and spun fibers. Cordura® is significantly more abrasion-resistant than most other nylon materials and is therefore particularly suitable for protective clothing. Cordura® fabrics have a pleasant, slightly textured, natural woven look.

COOLMAX®

100% polyester material: keeps you cool and comfortable, wicks moisture away from the body, dries quickly, is lightweight and breathable, comfortable to wear and easy to care for.

3D Air Mesh insert

The most important features of spacer fabrics are their moisture-wicking function, good pressure relief, thermoregulation, breathability and good air permeability.

GORE-TEX membrane

The GORE-TEX membrane is the heart of GORE-TEX products. It is permanently waterproof, completely windproof, and highly breathable.

• Water cannot penetrate from the outside
• Wind is kept out
• Sweat can escape to the outside unhindered

This way, GORE-TEX products keep the body dry and comfortably warm at all times.

The material has more than 1.4 billion micropores per square centimeter. These pores are 20,000 times smaller than a drop of water, but 700 times larger than a water vapor molecule. A grease-repellent protective layer on the membrane ensures permanent waterproofing and prevents body oils or insect repellents from penetrating.

Every product bearing the GORE-TEX logo comes with a guarantee of the above benefits and, of course, all GORE-TEX materials.

3-layer construction

3-layer GORE-TEX products are made of extremely lightweight material that can be packed small enough to fit in any tank bag, backpack, or pocket. The clothing is extremely breathable, permanently waterproof, completely windproof, and characterized by its low weight. This technology combines a GORE-TEX membrane with a special protective layer. This material is used to make a separate 3-layer GORE-TEX jacket/pants. Together with an outer jacket/pants, this creates an optimal combination.

The main comfort advantages:

• The separate GORE-TEX 3-layer technology jacket/pants can be worn either over or under the outer jacket/pants. When worn over the outer jacket/pants, the outer jacket/pants remain protected from moisture and dirt.
• Quick response to weather changes by simply pulling the GORE-TEX 3-layer technology jacket/pants over the outer clothing.
• Flexible use of the membrane in hot or cold weather. Direct ventilation of the body when using the outer jacket/pants alone.
• Low weight and pack size of GORE-TEX 3-layer technology clothing.

Clothing made from 3-layer GORE-TEX laminate offers increased durability without additional capacity. Fewer layers of clothing mean reduced weight and greater freedom of movement. A special GORE-TEX membrane is firmly bonded to various outer materials and an inner lining to form a single layer.

Over & under technology

Flexible clothing for all weather conditions!

The removable GORE-TEX membrane is designed so that it can be worn either over or under the base layer. Simply remove the membrane from the inside and pull it over the jacket or pants.

Highlights

• GORE-TEX membrane can be worn over or under the base combination
• Base combination stays dry and clean when worn over the top; body does not cool down when worn underneath
• Best possible ventilation when worn without membrane
• Membrane jacket and pants can also be used separately as leisurewear

What the technology can do

The GORE-TEX membrane is worn under the base layer in its default position. It is firmly attached to the base layer as an inner jacket or pants using zippers and snaps. In this position, the membrane serves as a windbreaker and keeps the body warm. Ideal for dry, cool, or changeable conditions. All outer and inner pockets are fully accessible.

In the event of prolonged or heavy rain, the GORE-TEX inner jacket and pants are removed from the base combination and quickly and easily pulled over the base combination. This keeps the base combination dry and clean and prevents the body from cooling down.

In dry and warm conditions, the membrane is not worn. The inner jacket and pants are carried separately. The body is optimally ventilated and cooled by the wind. In addition, the weight of the clothing is reduced and wearing comfort is increased.

Off-road, the membrane jacket and pants are also perfect for wearing as functional leisure and/or rainwear. This reduces additional luggage on tour.

Held Protector Adjustment (HPA) technology

Held Protector Adjustment HPA allows for easy and user-friendly adjustment of the protectors. It is recommended to use Velcro with a scale, which allows you to adjust the protectors quickly and precisely. This ensures optimal handling and individual adjustment to your needs.

Highlights

• Precisely fitting protector pocket with Velcro
• Position scale on the Velcro of the pants or jacket for precise positioning on the joints to be protected
• After washing, the exact position can be easily found again

Snaptech

The Snap-Tech collar with HELD-TEX® weather membrane is an excellent choice for motorcyclists who want to protect their neck from rain and wind and keep it dry, warm, and comfortable while riding. It protects you from cold wind while riding.

This is important for maintaining the right body temperature and preventing your neck from getting cold. It is also waterproof, which means it keeps your neck dry even in heavy rain. This is particularly important for preventing discomfort and cooling down due to moisture.