Highsider Typ 4, LED headlight insert 7 inch

E-approved

This round, chrome-plated reflector with clear glass has a high beam, low beam, parking light and daytime running light function. The daytime running light and position light are installed in a central strip, creating a very attractive light pattern - the low beam shines above the strip, the high beam below. The reflector emits an asymmetrical - only approved for right-hand traffic - luminous flux, E-approved.

HIGHSIDER highlights - give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely make your bike a highlight!

Dimensions

• Diameter A = 177 mm
• Diameter GA = 168 mm
• Diameter I = 160 mm
• T = 61 mm
• R = 10 mm

Connections

• Black cable = ground (-)
• Blue cable = low beam (+), power consumption at 12V: 1.8A, 22W
• Yellow cable = high beam (+), power consumption at12V: 1.3A, 13W
• Black cable = ground (-)

Daytime running light

• Black cable = ground (-)
• Red cable = daytime running light (+), power consumption at 12V: 1.2A, 14W
• White cable = position light (+), power consumption at 12V: 0,2A, 2,4W

Scope of delivery

• 1 piece headlight insert 226-018, E-approved

Optionally available

Complete HIGHSIDER headlight with this reflector

• 7 inch LED headlight RENO TYPE 4, chrome, 223-152
• 7 inch headlight HD-STYLE, chrome, 223-154
• 7 inch headlight BRITISH-STYLE, chrome, 223-156

Note 1

• Use asymmetrical, only approved for right-hand traffic.
• Enclosed standard 3-pin plug must be installed by customer after reflector installation.

View on plug contacts:

• High beam (yellow) = right
• low beam (blue) = top
• Ground (black) = left

Note 2

The daytime running light can also be used on vehicles without a light switch. For this purpose, the following components are required, for example:

• Switch no. 240-044
• HIGHSIDER DRL CONTROL- BOX CB1: 208-108 (switches between low beam and daytime running light)