Highsider Dual, electronic relay

HIGHSIDER Electronic two-channel relay 6-14V.

An electronic dual relay with inputs for all common push buttons or switches.

It is possible to control the desired function via plus as well as via minus.

If one of the two inputs is connected to ground or positive via a switch, the corresponding 12 V output is switched on.

At the same time, the outputs can supply lines up to 40 W in continuous operation.

Typical power consumers operated by non-latching pushbuttons (e.g. horn, low beam, high beam, etc.) can be controlled by the HIGHSIDER two channel relay.

The use of the relay instead of a direct connection of the consumer to the switch, allows the use of smallest cable cross sections and push buttons with low current values.

Example 1

• You want to use a small push button with a low flow current, for example to switch a horn (high current consumption). To prevent the button from being damaged by the power it normally draws, you simply use this electronic relay.
• It allows you to use switches or pushbuttons to switch high currents.

Example 2

• On some motorcycles (e.g. INDIAN) the turn signal ground is clocked. That means: With the help of the electronic dual channel relay you can now convert the ground clocked turn signal to positive. Thus, all turn signals, turn signal/tail light combinations or turn signal/position lights can still be used.
• (For the conversion to a turn signal/rear light combination (e.g. 254-540) you need 1 x the electronic relay for your vehicle)

Product advantages

• Extremely thin cable cross-sections for the connection of the switches
• Use of switches for low currents despite consumers with high currents
• Prolongation of the life of switches
• 2 independent channels
• Very small dimensions and light weight
• Completely sealed product (waterproof)
• Smaller and more flexible than expensive multi-channel switch boxes
• Protection against all possible wiring errors
• More flexible than ALL IN ONE SMART BOXES

Dimensions

• Width: 17 mm
• Depth: 9,5 mm
• Height: 17 mm
• Weight: 9 gr.

Connections

• Red (thick) = ignition plus 12V (+)
• Yellow (thick) = working output CH2 (+)
• Blue (thick) = working output CH1 (+)
• Yellow (thin) = control plus signal CH2
• Blue (thin) = control plus signal CH1
• Yellow/black (thin) = control minus signal CH2
• Blue/black (thin) = control minus signal CH1
• Maximum power: 40 Watt

Scope of delivery

• 1 piece two-channel relay 208-111