Zapisz się do naszego newslettera, a otrzymasz bon o wartości 10€

Held HLS Held-Light-System, Zestaw LED

Bezpieczeństwo dzięki widoczności. - Dzięki technologii HLS, Held wprowadza światło w ciemność! … Czytaj więcej
Sugerowana cena sprzedaży $ 72.01$ 56.74
Kolor:

Ogromny wybór marek
z ponad 200 000 artykułów
Wysyłka na cały świat,
w korzystnych cenach
100 dni na zwrot
z gwarancją zwrotu pieniędzy
Dział obsługi klienta
w jakości 1A
Darmowe prezenty
od 75 euro

Automatyczne tłumaczenie

Tekst oryginalny in English

Held HLS Held-Light-System, Zestaw LED

Nr artykułu: 11064930

Bezpieczeństwo dzięki widoczności. - Dzięki technologii HLS, Held wprowadza światło w ciemność!

W nocy, we mgle i deszczu technologia HLS jest decydującym czynnikiem w zapobieganiu wypadkom. W przeciwieństwie do pasków odblaskowych, które mogą odbijać tylko światło padające, fotokomórki HLS świecą niezależnie i trwale - podświetlenie w najprawdziwszym znaczeniu tego słowa.

Sercem technologii HLS jest zestaw diod LED HLS. Składa się on z dwóch białych i dwóch czerwonych modułów LED połączonych kablem łączącym USB. Do korzystania z zestawu HLS potrzebny jest kompatybilny zestaw Held Jacket lub Safety Vest z funkcją " LED Prepared" oraz standardowy pakiet baterii (Powerbank) z połączeniem USB jako źródłem zasilania.

Instalacja systemu HLS odbywa się w kilku krokach: Zestaw LED jest wkładany do kurtki lub kamizelki przez otwarty zamek błyskawiczny w tylnej komorze. Następnie końce białych prowadnic światła wkłada się od wewnątrz do odpowiednich otworów w obszarze klatki piersiowej ubrania i całkowicie przepycha przez rurę z tkaniny siatkowej. W ten sam sposób czerwone światłowody są przewlekane w tylnej części kurtki lub kamizelki.

W ten sam sposób czerwone światłowody są przewlekane w tylnej części kurtki lub kamizelki.

Po umieszczeniu wszystkich czterech modułów LED w wyznaczonych miejscach, kabel USB jest prowadzony przez dławik kablowy płaszcza lub kamizelki ochronnej. Teraz system jest gotowy do użycia i można go włączyć w dowolnym momencie poprzez podłączenie akumulatora lub wyłączyć go poprzez odłączenie.

Właściwości
  • Aktywny system LED zapewniający lepszą widoczność motocyklisty w ciemności i w warunkach słabej widoczności
  • Może być zintegrowany z wszystkimi Held "LED Prepared" produkty
  • Zasilanie dowolnym standardowym akumulatorem przez złącze USB
  • Czas pracy z akumulatorem 4.000 mAh ok. 7 godzin (akumulator/banek mocy nie jest wliczony w cenę!)

Held HLS Held-Light-System, LED set

Nr artykułu.: 11064930

Safety thanks to visibility. - With HLS technology, Held brings light into the dark!

The retrofittable Held Light System (HLS) is the latest development from Held to make motorcycling even safer. The illuminated LED modules, which are integrated into the protective clothing of the motorcyclist, provide a significantly better visibility of the rider in poor light conditions.

During night, fog and rain rides the HLS technology is a decisive factor for accident prevention. In contrast to reflector strips, which can only reflect incident light, the light guides of the HLS light up independently and permanently - a highlight in the truest sense of the word.

The heart of the HLS technology is the HLS LED Set. It consists of two white and two red LED modules connected by a USB connection cable. To use the HLS Set you need a compatible Held Jacket or Safety Vest with the feature "LED Prepared" and a standard battery pack (Powerbank) with USB connection as power source.

The installation of the HLS is done in a few steps: The LED set is inserted into the jacket or vest through the open zipper in the back compartment. Then the ends of the white light guides are inserted from the inside into the respective openings in the chest area of the garment and pushed completely through the mesh fabric tube. In the same way, the red light guides are threaded in the back area of the jacket or vest.

After all four LED modules have been placed in the designated places, the USB cable is led through the cable gland of the jacket or safety vest. Now the system is ready for use and can be switched on at any time by connecting the battery pack or switched off by disconnecting it.

Features
  • Active LED system for better visibility of the motorcyclist in darkness and poor visibility conditions
  • High-quality OSRAM lamps with white light at the front and red light at the back
  • Can be integrated into all Held "LED Prepared" products
  • Power supply with any standard battery pack via USB connection
  • Operating time with a 4.000 mAh battery approx. 7 hours (battery/powerbank is not included!)

Recenzje klientów

Bazując na 0 Ocenach

Masz doświadczenia z tym artykułem?

Napisz własną opinię teraz