con más de 200,000 artículos
económico
con garantía de devolución de dinero
servicio al cliente
Regalos gratuitos
Detalles del artículo
Traducción automática
Texto original in English
Highsider Pro Akron-RS, soporte de matrícula
Ref.: 11081294
El soporte de matrícula HIGHSIDER Akron-RS se adapta perfectamente a las líneas de tu moto gracias a su diseño.
El soporte de matrícula HIGHSIDER Akron-RS se adapta perfectamente a las líneas de tu moto gracias a su diseño.
El soporte específico para cada modelo de la HIGHSIDER Akron-RS permite el montaje en los puntos de montaje originales de su moto y por lo tanto un reemplazo sin más perforaciones o cortes.
El soporte de matrícula HIGHSIDER Akron-RS se adapta perfectamente a las líneas de su moto a través de su diseño.
Para evitar daños en los cables, todos los pasamuros de bordes afilados están protegidos por un pasacables de membrana de goma.
La placa de matrícula está hecha de chapa de acero y 2 mm de espesor. El corte preciso se realiza con láser. Tras el canteado, la placa recibe un recubrimiento de polvo negro resistente a la intemperie. Esto asegura un ajuste óptimo y durabilidad.
El ajuste continuo permite colocar la placa sin taladrar en la posición deseada. Para mantener la placa en esta posición, hay un tornillo de bloqueo adicional.
Los soportes de intermitentes del HIGHSIDER Akron-RS son ajustables en anchura y por lo tanto adecuados para cualquier tipo de intermitentes accesorios. Mediante esta opción de ajuste, podrá adaptar la posición de sus intermitentes a las matrículas más diversas. Para permitir la instalación de los intermitentes sin separación del arnés de cableado, los agujeros de 10 mm están ranurados hacia el lado.
También se puede ajustar la posición del reflector individualmente mediante un deslizador. Una adaptación a los diferentes diseños de placas de matrícula de la UE es por lo tanto ningún problema.
Para atornillar la matrícula de forma segura y reducir las vibraciones, se incluyen dos arandelas de goma. Otro tope de goma soporta la placa de matrícula en su parte inferior.
Para atornillar de forma segura y reducir las vibraciones, se incluyen dos arandelas de goma.
Características
- Soporte específico para cada modelo .
- Soporte de intermitentes ajustable de forma continua .
- Soporte de intermitentes ranurado para una fácil instalación sin separación de cables
- Reflector regulable de forma continua, homologado E
- Adecuado para matrículas europeas
- Ángulo de inclinación ajustable de forma continua
- Tornillo adicional para una seguridad óptima de la posición
- Fijación sencilla sin más pasos de trabajo (p. ej. taladrar)
- Fácil montaje de la placa de matrícula a través de los orificios ranurados .
El volumen de suministro del HIGHSIDER Akron-RS incluye
- Soporte específico del modelo con piezas de montaje .
- Placa de montaje de la matrícula HIGHSIDER Akron-RS
- Soportes ajustables para los intermitentes
- Soportes para los intermitentes.
- Reflector probado en E con soporte ajustable .
- Instrucciones de montaje
Notas
- Si hay reflectores laterales montados en su soporte de matrícula original, deben volver a colocarse en una posición adecuada o sustituirse por unos nuevos.
- Si hay reflectores laterales montados en su soporte de matrícula original, deben volver a colocarse en una posición adecuada o sustituirse por unos nuevos.
- Para los intermitentes originales está disponible opcionalmente el soporte especial para intermitentes 280-970.
- Para los intermitentes originales está disponible opcionalmente el soporte especial para intermitentes 280-970.
Highsider Pro Akron-RS, license plate holder
Article No.: 11081294
The HIGHSIDER Akron-RS license plate holder adapts perfectly to the lines of your bike through its design.
The model-specific bracket of the HIGHSIDER Akron-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting.
To avoid damage to cables, all sharp-edged feedthroughs are protected by a rubber membrane grommet.
The license plate is made of sheet steel and 2 mm thick. Precise cutting is done by laser. After edging, the plate is given a weather-resistant black powder coating. This ensures an optimal fit and durability.
The stepless adjustment allows you to bring the plate without drilling in the desired position. To keep the plate in this position, there is an additional locking screw.
The turn signal mounts of the HIGHSIDER Akron-RS are adjustable in width and thus suitable for any type of accessory turn signals. Through this adjustment option, you can adjust the position of your turn signals to the most diverse license plates. To allow the installation of the turn signals without separation from the wiring harness, the 10 mm holes are slotted to the side.
You can also adjust the position of the reflector individually via a slider. An adaptation to the different designs of EU license plates is therefore no problem.
To screw the license plate securely and reduce vibrations, two rubber washers are included. Another rubber buffer supports the license plate on its underside.
Features
- Model specific mount
- Continuously adjustable turn signal holder
- Slotted turn signal mount for easy installation without cable separation
- Continuously adjustable reflector, E-approved
- Suitable for European license plates
- Steplessly adjustable tilt angle
- Additional screw for optimal position security
- Easy fixation without further work steps (e.g. drilling)
- Easy mounting of the license plate through slotted holes
The scope of delivery of the HIGHSIDER Akron-RS includes
- Model-specific bracket with mounting parts
- HIGHSIDER Akron-RS license plate mounting plate
- Adjustable turn signal brackets
- E-tested reflector with adjustable bracket
- Mounting instructions
Notes
- If there are side reflectors mounted on your original license plate holder, they must be reattached in a suitable position or replaced with new ones.
- For the original turn signals the special turn signal holder 280-970 is optionally available.
Productos compatibles
Comentarios de los clientes
¿Tienes experiencia con este artículo?





















































