con más de 200,000 artículos
económico
con garantía de devolución de dinero
servicio al cliente
Regalos gratuitos
Detalles del artículo
Traducción automática
Texto original in English
Highsider Pro X7, retrovisor con intermitente
Ref.: 11101751


E-approved
El distintivo diseño, inspirado en la tecnología militar, distingue a este espejo de formas elegantes y alta calidad. Combinado con un acabado en negro mate, el cabezal del espejo—fabricado en plástico de primera calidad con sus elementos angulares—tiene un aspecto llamativo.
Cuidado con el espejo.
Gracias al uso de materiales ligeros, la serie HIGHSIDER pro entra en la categoría de peso mosca. Una articulación ajustable en la cabeza del espejo proporciona opciones de ajuste adicionales.
Los espejos se montan en el tubo del manillar mediante el sistema de abrazadera. Adecuado para tubos de manillar con un diámetro interior de 12 a 22 mm.
Carácter y visibilidad—ya sea retro o moderno. La serie de espejos HIGHSIDER pro se distingue por su diseño distintivo y su función aerodinámica. Eso es previsión en la perfección.
En esta versión, un intermitente LED está integrado en el brazo del espejo. Los espejos con intermitentes LED deben instalarse siempre por parejas. Asegúrese de que los intermitentes estén orientados en paralelo al vehículo y hacia delante con respecto al suelo en el sentido de la marcha.
Los intermitentes deben estar orientados hacia delante en el sentido de la marcha.
Dimensiones
- Ancho de la cabeza del espejo: 119 mm
- Altura de la cabeza del espejo: 90 mm
- Altura del cabezal del espejo: 90 mm
- Ancho total del espejo: 60 mm
- Altura total del espejo: 180 mm
- Longitud del brazo (de centro a centro): 120 mm
- Peso: 240 gr
Cableado
- Cable amarillo = Intermitente (+)
- Cable negro = Tierra (-)
- Cable negro = Tierra (-)
- Cable negro = Tierra (-)
Consumo de energía a 12,5 V
- Señales de giro: 1,35 W
Alcance de suministro
- 1 espejo de manillar Highsider Pro X7 con intermitentes .
- 1 manguito de sujeción cada uno
- 1 manguito espaciador cada uno
- 1 tornillo central M6
- 1 x tuerca cónica M6
- 1 x tapa de cubierta de plástico negro
Highsider Pro X7, bar end mirror w turn signal
Article No.: 11101751
E-approved
The distinctive design, inspired by military technology, sets this elegantly shaped and high-quality mirror apart. Combined with a matte black finish, the mirror head—made of premium plastic with its angular elements—has a striking appearance.
Thanks to the use of lightweight materials, the HIGHSIDER pro series falls into the flyweight category. An adjustable joint on the mirror head provides additional adjustment options.
The mirrors are mounted in the handlebar tube using the clamp system. Suitable for handlebar tubes with an inner diameter of 12 to 22 mm.
Character and visibility—whether retro or modern. The HIGHSIDER pro mirror series is distinguished by its distinctive design and aerodynamic function. That is foresight in perfection.
In this version, an LED turn signal is integrated into the mirror arm. Mirrors with LED turn signals must always be installed in pairs. Make sure the turn signals are oriented parallel to the vehicle and forward relative to the ground in the direction of travel.
Dimensions
- Mirror head width: 119 mm
- Mirror head height: 90 mm
- Total mirror width: 60 mm
- Total mirror height: 180 mm
- Arm length (center-to-center): 120 mm
- Weight: 240 gr
Wiring
- Yellow wire = Turn signal (+)
- Black wire = Ground (-)
Power consumption at 12.5 V
- Turn signals: 1.35 W
Scope of delivery
- 1 Highsider Pro X7 handlebar-end mirror with turn signals
- 1 clamping sleeve each
- 1 spacer sleeve each
- 1 x M6 center screw
- 1 x M6 cone nut
- 1 x black plastic cover cap


Productos compatibles
Comentarios de los clientes
¿Tienes experiencia con este artículo?





















































