e ofertas de topo
custo-benefício
ereembolso do dinheiro
serviço ao cliente
brindes gratuitos
Detalhes do artigo
Tradução automática
Texto original in English
Revit Wayden H2O, luvas impermeáveis
N.º art.: 11088885



Estas são as luvas Wayden H2O minimalistas: uma solução impermeável inteligente com um punho curto para os ciclistas urbanos que conquistam as ruas da cidade com um tempo menos do que ideal.
Caraterísticas
- Softshell 3L
- Couro de cabra tingido com tinta de tambor e repelente de água
- Couro de camurça com tratamento repelente de água
- Impermeável graças à membrana hydratex|Z-Liner
- Microfibra e-touch
- Fibra de enchimento fixa
- Revestimento em pelo de alta densidade
- Revestimento em tecido tricolor
- Fecho com velcro
- Tecido elástico nas costas da mão
- Aba de ajuste no punho
- Punho curto
- Tecido condutor no dedo indicador
- Tecido condutor no polegar
- Limpador de viseira em camurça
- Pull tab
- Refletor laminado no dedo mindinho
- Refletor laminado no dedo
Proteção
- Proteção dos nós dos dedos em 3D SEESOFT
- Espuma com memória por baixo do protetor dos nós dos dedos
- PWR|Shield na palma da mão
- OrthoLite® Espuma de conforto UltraLite na palma da mão
Cobrindo as bases
Manter as mãos secas com uma construção de impermeabilização hydratex|Z-liner. Verificar. Mantendo as mãos quentes com um forro de pele de alto loft, juntamente com um forro tri-fleece. Dupla verificação. Certificar-se de que pode calçar e descalçar facilmente as luvas graças ao punho com aba de puxar. Tantas verificações. Para não mencionar o fecho de gancho e laço e a aba do punho para um ajuste ideal, ou o limpa para-brisas em pele de camurça para afastar a chuva. Nível de entrada definitivamente não significa despojado de caraterísticas essenciais.
Segurança em mente
Inclui uma junta SEESOFT 3D, espuma de memória sob o protetor da junta (para maior conforto da mão), juntamente com uma camada dupla de reforço e forte de PWR|Shield na palma da mão. Vá para onde precisa de ir sem pensar na segurança das suas mãos, porque as luvas Wayden H2O têm-no coberto.
Hydratex®|Z-liner
Uma camada impermeável é laminada num suporte para construir a membrana REV’IT! hydratex®|Z-liner. O suporte, por sua vez, protege a membrana contra danos causados pelo desgaste, e as costuras da membrana são coladas para garantir a impermeabilização. O Z-liner é construído entre o forro e o revestimento exterior. A membrana REV’IT! hydratex®|Z-liner é utilizada em peças de vestuário que exigem um elevado nível de proteção contra todas as condições meteorológicas.
Forro de Pele High-Loft
Este tipo de isolamento imita as propriedades isolantes naturais de um pelo de animal: a estrutura das fibras de alta maciez armazena mais ar do que as fibras normais, esse isolamento natural retém o calor.
junho 3D SEESOFT
A espuma SEESOFT desenvolvida internamente, leve e protetora – usada principalmente em protetores de costas e peito – foi reprojetada para se integrar diretamente na construção do corpo das luvas & apos;. Para oferecer uma proteção de impacto leve e precisa onde é mais eficaz sem impedir a destreza.
Espuma de memória
Espuma viscoelástica que se adapta à mão do piloto & # 39; para maior conforto e proteção.
PWR|Shield
PWR|Shield é criado usando uma técnica de tricô única que resulta em um tecido com corte insuperável, rasgo e resistência à abrasão.
OrthoLite® Espuma de conforto UltraLite
Espuma integrada de células abertas especialmente desenvolvida pelos especialistas da OrthoLite® para absorver choques e vibrações. Evita que os dedos fiquem dormentes ou cansados devido a vibrações de alta frequência e, assim, aumenta o conforto em passeios mais longos.
Composição material
62% poliéster, 32% couro, 4% poliamida, 2% poliuretano
Revit Wayden H2O, gloves waterproof
Article No.: 11088885
These are the minimalist Wayden H2O gloves: a smart waterproof solution with a short cuff for urban riders conquering the city streets in less than ideal weather.
Features
- Softshell 3L
- Drum-dyed water-repellent goatskin leather
- Water-repellent treated suede leather
- Waterproof due to hydratex|Z-Liner membrane
- Microfiber e-touch
- Fixed fiberfill
- High-loft fur lining
- Tri-fleece lining
- Velcro closure
- Stretch fabric on the back of the hand
- Adjustment tab on cuff
- Short cuff
- Conductive fabric on the index finger
- Conductive fabric on the thumb
- Suede visor wiper
- Pull tab
- Laminated reflector on little finger
- Laminated reflector on finger
Protection
- SEESOFT 3D knuckle
- Memory foam underneath knuckle protector
- PWR|Shield at palm
- OrthoLite® UltraLite comfort foam at palm
Covering the bases
Keeping hands dry with a hydratex|Z-liner waterproofing construction. Check. Keeping hands warm with a high loft fur liner along with a tri-fleece liner. Double check. Making sure you can easily put the gloves on and take them off thanks to the pull tab cuff. So many checks. Not to mention the hook-and-loop closure and cuff tab for an ideal fit, or the suede leather visor wiper to swipe away the rain. Entry level definitely doesn’t mean stripped of essential features.
Safety in mind
Included is a SEESOFT 3D knuckle, memory foam underneath the knuckle protector (for additional hand comfort), along with a reinforcing and strong double layer of PWR|Shield at the palm. Get to where you need to go without thinking about the safety of your hands because the Wayden H2O gloves have you covered.
Hydratex®|Z-liner
A waterproof layer is laminated onto a carrier to construct the REV’IT! hydratex®|Z-liner membrane. The carrier, in turn, protects the membrane against wear-and-tear damage, and the seams of the membrane are taped to ensure waterproofing. The Z-liner is constructed between the lining and the outer shell. The REV’IT! hydratex®|Z-liner membrane is used in garments that demand a high level of all-weather protection.
High-Loft Fur Lining
This type of insulation mimics the natural insulating properties of an animal fur: The structure of high-loft fibers stores more air than normal fibers, this natural insulation traps heat.
SEESOFT 3D knuckle
Revit’s in-house developed, lightweight, and protective SEESOFT foam – primarily used in back and chest protectors – has been reengineered to integrate directly into the gloves’ body construction. To offer lightweight, pinpointed impact protection where it’s most effective without impeding dexterity.
Memory Foam
Viscoelastic foam that conforms to the rider's hand for improved comfort and protection.
PWR|Shield
PWR|Shield is created using a unique knitting technique that results in a fabric with unsurpassed cut, tear and abrasion resistance.
OrthoLite® UltraLite comfort foam
Integrated open-cell foam specially developed by the specialists at OrthoLite® to absorb shocks and vibrations. It prevents the fingers from becoming numb or tired due to high-frequency vibrations and thus increases comfort on longer rides.
Material composition
62% polyester, 32% leather, 4% polyamide, 2% polyurethane



Produtos semelhantes
Críticas dos clientes
Já experimentaste o artigo?





















































