con más de 200,000 artículos
económico
con garantía de devolución de dinero
servicio al cliente
Regalos gratuitos
Detalles del artículo
Traducción automática
Texto original in English
Revit Volcano, guantes
Ref.: 11067440
El Volcano es el par más ligero de guantes de aventura de verano de la colección REV'IT!'s (fuera de los guantes de la colección DIRT Series).
Se han diseñado para tener un alto nivel de tacto en los puños y palancas, manteniendo las manos cómodas y frescas durante toda la conducción.
Para crear los guantes Adventure más ligeros de la colección, REV'IT!e ha utilizado un tejido de microfibra adherente y confortable en la zona de la palma, combinado con una malla de aire en el exterior para mantener las manos frescas y secas.
Un cómodo y suave protector de nudillos combinado con los nudillos de los dedos de TPR, y la protección del pulgar y la palma de Temperfoam son la armadura de la mano. Ponerse y asegurar los guantes no supone ningún esfuerzo gracias al tirador del puño y al cierre de la correa de la muñeca con gancho.
Disponibles en una amplia gama de colores, estos guantes combinan con casi cualquier conjunto que lleven los pilotos.
Características
- Estiramiento en los dedos
- .
- Puño regular
- .
- Cierre de gancho y bucle
- Cuidado con los dedos
- Punta del dedo Connect: no vuelvas a quitarte los guantes para contestar al teléfono o al sistema de navegación. La punta del dedo connect ha sido diseñada específicamente para manejar pantallas táctiles.
- Parche de agarre en la palma de la mano - Un parche de agarre está hecho con un patrón texturizado para ofrecer un magnífico rendimiento de agarre.
- .
- Lengüeta de arrastre
- Por favor, no se preocupe.
- Reflejo en los dedos
- .
- Estos guantes están certificados según la norma EN 13594, publicada en 2015, y han alcanzado el nivel 1 de la clasificación KP.
- .
Prenda exterior
- Malla de aire 3D totalmente ventilada
- .
- Malla de aire 3D: este tejido de punto tiene una estructura abierta y tridimensional que garantiza una buena ventilación durante la conducción. La malla de aire 3D es un elemento imprescindible para los ciclistas de largo recorrido.
- .
- Piel artificial - Una versión sintética de la piel con un aspecto similar.
- Piel artificial - Una versión sintética de la piel con un aspecto similar.
- Piel artificial - Una versión sintética de la piel con un aspecto similar.
- Automan stretch - Otro tipo de tejido elástico, el Automan se utiliza para mantener la protección durante la conducción, pero con una silueta ajustada y elástica que maximiza la comodidad.
Forro
- Forro de tricot - Gracias a su exclusivo patrón de tejido de punto cerrado, el tricot es liso por un lado, mientras que luce textura por el otro. Esto hace que sea resistente y suave—ideal para usar en un forro cómodo y duradero que mantendrá su forma durante mucho tiempo.
Se trata de un producto de alta calidad que se puede utilizar en cualquier lugar del mundo.
Protección
- Escudo PWR en la palma: el Escudo PWR está creado con una técnica de punto única que da como resultado un tejido con unos niveles de resistencia al corte, al desgarro y a la abrasión insuperables. Este producto está equipado con PWR Shield en la palma de la mano.
- SEESOFT™ nudillos - El protector de nudillos está fabricado con espuma de memoria SEESOFT™ que absorbe los impactos, y se ha incorporado a esta prenda para reducir eficazmente la energía del impacto transmitida en un choque.
- Temperfoam® nudillos de los dedos - La espuma autocontorneable se utiliza en zonas donde la movilidad y el ajuste son imprescindibles, como los nudillos de los dedos. Temperfoam® viene en una versión sólida, así como en una versión perforada.
- Temperfoam® nudillos
- Temperfoam® deslizador de la palma
- Protectores de nudillos de dedos inyectados en TPR - El TPR ofrece una excelente resistencia al impacto, a la fatiga por flexión y al desgarro, lo que lo convierte en un material defensivo ideal para la protección de los nudillos. Las piezas de TPR están inyectadas en la carcasa exterior y permiten la libertad de movimiento.
- Por lo tanto, los protectores de nudillos son muy resistentes.
Composición del material
56% poliamida, 31% poliuretano, 11% poliéster, 2% otras fibras
Revit Volcano, gloves
Article No.: 11067440
The Volcano is the lightest pair of summer adventure riding gloves in REV'IT!'s collection (outside of the gloves in the DIRT Series collection).
They've been designed to have a high level of feel on the grips and levers while keeping hands comfortable and fresh during the whole ride.
To create the lightest Adventure gloves in the collection, REV'IT!e used a grippy and comfortable micro-fiber fabric on the palm area combined with air mesh on the outside to keep hands cool and dry.
A comfortable, soft knuckle protector combined with TPR finger knuckles, and Temperfoam® thumb and palm protection are the hand's armor. Putting on and securing the gloves is effortless thanks to the puller on the cuff and a hook-and-loop wrist strap closure.
Available in a wide range of colors, these gloves match almost any outfit riders are wearing.
Features
- Stretch at fingers
- Regular cuff
- Hook-and-loop closure
- Connect Finger Tip - Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.
- Grip patch at palm - A grip patch is made with a texturized pattern to deliver a superb grip performance.
- Pull tab
- Reflection at finger
- These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.
Outer garment
- Fully ventilated 3D air mesh
- 3D Air Mesh - This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders.
- Artificial Leather - A sythetic version of leather with a similar look.
- Automan stretch - Another type of stretch fabric, Automan is used to maintain protection while riding, but with a form-fitting and elastic silhouette that maximizes comfort.
Lining
- Tricot liner - Thanks to its unique close knit weave pattern Tricot is smooth on one side, while sporting texture on the other side. This makes it sturdy and soft—ideal to use in a comfortable and durable liner that will hold its shape for a very long time.
Protection
- PWR Shield at palm - PWR Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels. This product is equipped with PWR Shield at the palm.
- SEESOFT™ knuckle -The knuckle protector is made of impact absorbing SEESOFT™ memory foam, and has been incorporated in this garment to effectively reduce the energy of impact transmitted in a crash.
- Temperfoam® finger knuckles - The self-contouring foam is used in areas where mobility and fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version.
- Temperfoam® knuckle
- Temperfoam® palm slider
- TPR injected finger knuckle protectors - TPR offers excellent resistance to impact, flex fatigue and tearing making it an ideal defensive material for knuckle protection. TPR parts are injected in the outer shell and allow freedom of movement.
Material composition
56% polyamide, 31% polyurethane, 11% polyester, 2% other fibers
Productos compatibles
Comentarios de los clientes
¿Tienes experiencia con este artículo?
Escrito por Ronen Baruch el 06.04.2022
Contraseña: ningún dato
Nice summer gloves
Escrito por Jernej Bevk el 17.10.2021
Contraseña: Resulta tal como se indica
In last years I found that Revit gloves suit me quite well, sometimes I have problems with too narrow fingers, but they are much less problematic than Alpinestar od Dainese, and much nicer than Held. Those gloves are not lined, so they fit comfortable on my fingers. All in all, very nice summer glove. A lot of protection, without overdoing it as in more \"racing\" oriented gloves, simple and nice design. Some find the inner stitches on fingers rough, but I don\'t have problems with that.
In last years I found that Revit gloves suit me quite well, sometimes I have problems with too narrow fingers, but they are much less problematic than Alpinestar od Dainese, and much nicer than Held. Those gloves are not lined, so they fit comfortable on my fingers. All in all, very nice summer glove. A lot of protection, without overdoing it as in more \"racing\" oriented gloves, simple and nice design. Some find the inner stitches on fingers rough, but I don\'t have problems with that.
Nice gloves, but...
Escrito por Gábor DrUngvári el 16.07.2021
Contraseña: Resulta 1 número más pequeño
The gloves are nice but it seems a little bit tighter than usual. I have 3 Revit gloves all of them is size \"L\" but this is tighter than the others. On the other hand there are stitches inside the gloves which hardly press my fingers so it is uncomfortable. The gloves are very quality products but don\'t buy it without trying them on.
The gloves are nice but it seems a little bit tighter than usual. I have 3 Revit gloves all of them is size \"L\" but this is tighter than the others. On the other hand there are stitches inside the gloves which hardly press my fingers so it is uncomfortable. The gloves are very quality products but don\'t buy it without trying them on.





















































