con más de 200,000 artículos
económico
con garantía de devolución de dinero
servicio al cliente
desde 75€
Traducción automática
Texto original in English
Revit Control, guantes
Ref.: 11085701
Para los entusiastas de las carreras que no necesitan renunciar a nada (sin ir a tope de especificaciones) te presentamos los guantes Control. Una mezcla de años de datos y pruebas de nuestros pilotos de MotoGP en tus manos para que los uses en tu circuito preferido.
Construidos para la velocidad y el confort
Desliza tus manos en estos guantes de estilo guantelete y asegúralos fácilmente con un cierre de doble puño y una correa para la muñeca. De este modo, te aseguras de tener la tensión precisa en todo momento mientras aceleras o frenas en los vértices. El parche de agarre en la palma y el pulgar añade ese extra de agarre que necesitarás a velocidades de pista.
El cuerpo
El cuerpo de los guantes Control se compone de un resistente pero flexible cuero de cabra y piel de vaca, que te proporciona la flexibilidad necesaria para mover las manos con libertad desde el primer momento. Pero esto no es todo. La piel de canguro en el interior de la mano los hace aún más duraderos y resistentes, a la vez que te proporcionan un mejor tacto del manillar. ¡Añade la malla de aire 3D en el dorso de las correas de los puños y las manos se mantendrán frescas cuando las cosas se calienten.
Cuidado!
Dedos precurvados, elásticos en los lugares donde necesitas más flexibilidad (pulgar, labio del dedo y labios del pulgar) y, por primera vez en la historia de nuestros guantes, la unión exterior de los dedos ayuda a los pilotos de pista a prepararse para el éxito. Por no hablar de Revit también incluyó un panel elástico en el interior de la mano para aún más destreza. También se ha incorporado un forro tri-fleece que absorbe la humedad.
La absorción de impactos viene de la mano de la espuma SEESOFT en la palma y la muñeca, mientras que Temperfoam® se puede encontrar en la parte posterior de la mano, el puño, los dedos, la palma y más. Además, los nudillos duros de TPU, los nudillos de los dedos y el deslizador de la palma están ahí por si te caes.
Este tejido tricot de poliéster se utiliza para el forro de los guantes, y cepillado para proporcionar calor adicional sin añadir volumen. El forro evacua la humedad, para evitar que las manos se humedezcan. Forro tricot.
Con la punta del dedo conductora, puedes hacer precisamente eso. Colocada estratégicamente de forma correcta en tus dedos índices, podrás configurar/cambiar tus rutas de navegación, indicar tu ubicación a tus amigos, seleccionar tu lista de reproducción de música o cualquier otra cosa para la que utilices una pantalla táctil. Esta función es especialmente práctica cuando se conduce con tiempo frío, ya que no es necesario quitarse los guantes y poner las manos en riesgo de congelación por choque. Estarás calentito, acogedor y con el control estés donde estés.
PWR|yarn es un hilo 100% de nailon con una unión interna única, que le confiere una excelente durabilidad, una gran resistencia a la tracción y a la rotura, y la máxima resistencia a la abrasión. Su fuerza proviene de su estructura única, como un hilo de 3 hilos con un 4º hilo extra hilado en él. Este cuarto hilo se calienta para unirse a los otros tres, por lo que nunca se deshace ni se abre. Las costuras con hilo PWR resisten incluso las tensiones más extremas y son perfectas para las costuras exteriores de guantes y prendas de vestir.
Las costuras con hilo PWR están situadas en el exterior del guante, eliminando cualquier punto de presión potencial en las costuras, y proporcionando a estos guantes la máxima sensibilidad que todo corredor exige. Las costuras con hilo PWR son perfectas para las costuras exteriores de guantes y prendas.
La piel de cabra curtida se considera especialmente duradera y se utiliza a menudo para guantes y otros productos que requieren un tipo de piel suave. Piel de cabra curtida con acabado WR.
La piel de cabra con acabado WR ha sido sometida a un proceso que la hace repelente al agua y resistente a las manchas. El revestimiento WR se adhiere al material a nivel molecular, mejorando su repelencia natural al agua y la suciedad sin alterar el aspecto, el tacto o la transpirabilidad del tejido. La piel de cabra con acabado WR ha sido sometida a un proceso que la hace repelente al agua y resistente a las manchas.
Esta espuma autocontorneante se utiliza en zonas donde la movilidad y el ajuste son imprescindibles, como los nudillos. Temperfoam® está disponible tanto en versión rígida como perforada. Temperfoam®Preparándote para el éxito
Seguridad incorporada
Características
Prendas exteriores
Forro
Características climáticas
Protección
Certificación
Forro Tri-Fleece
Punta de los dedos conductora
PWR|hilo
Costuras exteriores
Piel de cabra curtida con acabado WR
Temperfoam®
Nudillos rígidos
El protector de nudillos hard shell refuerza una parte muy vulnerable de la mano sin comprometer la flexibilidad y la libertad de movimiento.
El protector de nudillos hard shell refuerza una parte muy vulnerable de la mano sin comprometer la flexibilidad y la libertad de movimiento.
Forro Tri-Fleece
Este tejido tricot de poliéster se utiliza para el forro de los guantes, y cepillado para proporcionar calor adicional sin añadir volumen. El forro expulsa la humedad para evitar que las manos se humedezcan.
Forro tricot.
Parche de agarre
Un parche de agarre está hecho con un patrón texturizado para ofrecer un magnífico rendimiento de agarre.
Los parches de agarre están hechos con un patrón texturizado para ofrecer un magnífico rendimiento de agarre.
Composición del material
95% cuero, 4% poliamida, 1% poliuretano
piel.
Revit Control, gloves
Article No.: 11085701
For the race enthusiast that need not compromise (without going full spec) meet the Control gloves. A blend of years’ worth of data and testing from our MotoGP riders delivered to your hands to use on your preferred track.
Built for speed and comfort
Slip your hands into these gauntlet-style gloves and easily and secure them with a double cuff closure and a wrist strap. Making sure you have the precisely tailored tension every time while you throttle or brake your way through the apexes. Adding that extra bit of grip you’ll need at track speeds is the grip patch at the palm and thumb.
The body of it
The body of Control gloves is comprised of a tough yet supple goat leather and cowhide, giving you the flexibility to move your hands freely from the get-go. But it doesn’t stop there. Kangaroo leather on the inside of the hand makes them even more durable and stronger, while at the same time, giving you a better feel of the handlebars. Add in the 3D air mesh at the back of the cuff straps and hands can stay cool when things heat.
Setting you up for success
Pre-curved fingers, stretch in the places you need the most flexibility in (think thumb, finger lip and thump lips), and for the first time in our gloves’ history, outside finger binding helps set track riders up for success. Not to mention Revit also included a stretch panel on the inside of the hand for even more dexterity. A moisture-wicking tri-fleece liner has also been incorporated.
Incorporated safety
High-impact absorption comes in the form of the SEESOFT foam at the palm and wrist, while Temperfoam® can be found at the back of the hand, cuff, fingers, palm, and more. Furthermore, a TPU hard knuckle, finger knuckles, and palm slider are there for you if you take a tumble.
Features
- Stretch inserts on the thumb
- Stretch inserts on the fingers
- Stretch fabric on the thumb
- Adjustment tab on the cuffs
- Adjustment strap on wrist
- Concertina structure
- Double cuff closure
- Wrist strap
- Anti-slip material on the thumb
- Anti-slip material on the palm, grip patch
- Sewn on the outside
- Long cuff
- Conductive tissue on the index finger
- Pre-curved fingers
Outer garment
- 3D Air Mesh
- Kangaroo leather
- Microfiber e-touch
- PU coated fabric
- PWR | Four-way stretch
- Cowhide
- Drum-tanned goatskin
- Water-repellent Goat Digital goat leather
Lining
- Moisture-wicking tri-fleece lining
Climate characteristics
- Ventilation holes
Protection
- Little finger bridge
- PWR|Yarn
- SEESOFT on the wrist
- SEESOFT on the palm
- Temperfoam® on the knuckle of the thumb
- Temperfoam® on the cuff
- Temperfoam® on the back of the hand
- Temperfoam® knuckles
- Temperfoam® palm slider
- Temperfoam® under the ankle protector
- TPU upper hand protector
- TPU hard-shell thumb protector
- TPU hard shell knuckles
- TPU hard shell palm slider
- TPU hard shell knuckles
- TPU cuff protector
Certification
- Certified according to the EN 13594:2015 standard
- Meets the level 1 KP protection standard
Tri-Fleece liner
This polyester tricot fabric is used for glove lining, and brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp.
Conductive fingertip
With the conductive fingertip, you can do just that. Strategically placed correctly on your index fingers, you can set/change your navigation routes, tell your friends your location, select your music playlist, or whatever else you use a touchscreen for. This feature is especially handy when driving in cold weather, no need to take off your gloves and put your hands at risk of shock freezing. You'll be warm, cozy and in control wherever you are.
PWR|yarn
PWR|yarn is a 100% nylon thread with a unique internal bonding, which imparts excellent durability, high tensile and breaking strength, and ultimate abrasion resistance. Its strength comes from its unique structure, as a 3-wired yarn with an extra 4th wire spun into it. This 4th wire is heated to bond with the other 3 threads, so it will never unravel or split open. Seams with PWR|yarn hold under even the most extreme stress, and are perfect for outer seams on gloves and garments.
Outside stitching
The PWR|yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.
Drum tanned goatskin with WR finish
Tanned goatskin is considered to be particularly durable and is often used for gloves and other products that require a soft type of leather.
Goatskin with WR finish has undergone a process that makes it water-repellent and stain resistant. The WR coating is bonded to the material at a molecular level, enhancing the material's natural water and dirt repellency without altering the look, feel or breathability of the fabric.
Temperfoam®
This self-contouring foam is used in areas where mobility and fit are a must, such as the knuckles. Temperfoam® is available in both a rigid and a perforated version.
Hard shell knuckle
The hard shell knuckle protector reinforces a very vulnerable part of the hand without compromising flexibility and freedom of movement.
Tri-Fleece liner
This polyester tricot fabric is used for glove lining, and brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp.
Grip patch
A grip patch is made with a texturized pattern to deliver a superb grip performance.
Material composition
95% leather, 4% polyamide, 1% polyurethane
Accesorios relevantes
Productos compatibles
Revit Control H2O, chaqueta textil impermeable mujer | $ 246.96 |
Revit Control, traje de cuero 1ud. perforado | $ 960.43 |
Revit Control Air H2O, chaqueta textil impermeable mujer | $ 228.67 |
Revit Control H2O, chaqueta textil impermeable | $ 246.96 |
Revit Control, chaqueta de cuero/textil | $ 512.23 |
Comentarios de los clientes
¿Tienes experiencia con este artículo?