Revit Atwater, veste en textile

Avertum Tech-Air® airbag system compatible

A true form-meets-function, fashion-statement piece, the Atwater jacket doesn’t just look the part - it plays the part. Built primarily from hydratex|WindBarrier softshell and offset with contrasting crinkled ripstop fabric on key details, the lightweight and comfortable Atwater jacket feels just as good as it looks - if not better.

With more pocket space than comparable fashion-forward, casually styled motorcycle jackets, and a ventilated windcatcher behind the main zipper, the windblocker-style Atwater jacket doesn’t just look utilitarian - it is. Large zippered stow pockets on the front and an easily accessible bicep-mounted pocket add both practicality and standout style. Similar attention to function-focused details comes from the rib-knit cuffs, providing a flexible fit for added comfort. The story of storage continues inside: a large inner pocket in the lining and a waterproof pocket on the facing offer easy access - even when the jacket is fully zipped.

Beyond its casual cool and everyday convenience, the Atwater jacket is, above all, still a motorcycle jacket - with the protective credentials to prove it. Boasting an AA safety rating and nearly unnoticeable Level 1 SEESMART impact protection at the shoulders and elbows, you’re well looked after. And upgrading protection is easy - it’s prepared to accommodate an optional Level 2 SEESOFT back protector.

Features

• Softshell 3L, Polyester 1x1 Ripstop and Polyamide 140D Crinkle Ripstop outer
• DWR C0 Sustainable water-repellent finish 
• Outer shell made with recycled polyester
• 3D mesh lining
• Lining made with recycled polyester
• hydratex®|WindBarrier®
• Vegan product
• Regular fit
• Comfort collar
• Air outlet on upper back
• Direct ventilation at center front
• Knitted cuffs
• Inner waterproof napoleon pocket
• Two stash pockets on chest
• Inner pocket
• Sleeve pocket
• Short connection zipper
• Jeans loop
• Laminated reflection on back
• Prepared for SEESOFT Level 2 insert back protector FPB003 / FPB004
• SEESMART Level 1 shoulder protectors RV34
• SEESMART Level 1 elbow protectors RV35
• Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
• Class AA certified according to standard EN 17092-3:2020

Polyester Ripstop

Polyester yarns woven into a ripstop fabric. Thick reinforcement threads are woven into the fabric at regular intervals in a cross-hatch pattern known as ripstop.

Polyamide 140D Crinkle Ripstop

Lightweight ripstop material with a crinkle look made from durable polyamide adds character to the design.

hydratex®|WindBarrier®

The REV'IT! WindBarrier® membrane is laminated between two separate layers of material: a stretchy upper layer and a soft fleece inner layer. This combination protects against wind and helps repel water. Protection from wind and rain prevents hypothermia and improves comfort and warmth for the motorcyclist.

SEESOFT™ Level 2 Back Protector - Type RV

The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT™ Level 2 Back Protector Insert Type RV - an easy upgrade for maximum safety.

SEESMART™ Level 1 Protectors

SEESMART™ protectors offer maximum flexibility while still passing the Level 1 impact tests according to EN1621-1:2012, both under normal and hot (T+) conditions.

Avertum Tech-Air® Airbag System Ready – One Size Larger

You can wear the REV'IT! Avertum Tech-Air® airbag – or a Tech5 airbag – if you purchase the garment one size larger than your usual size.

If you want to wear a garment that is labeled “prepared for the Avertum Tech-Air® airbag system,” you must ensure that the garment can accommodate the expansion of the airbag.

REV'IT! therefore recommends following the fit equation below:

• Measure your chest circumference and divide the result by two
• Measure the garment flat across the chest line
• If the difference between point 1 and point 2 is 12 centimeters or more, the garment is suitable for wearing over the airbag

Note

Please note that the garment should be purchased in the correct size so that the shoulder and elbow protectors fit properly and provide optimal protection in the event of an accident. To make room for the airbag to expand, you can remove any separate layers (thermal lining, waterproof lining) that could restrict the airbag's expansion in the event of an accident.

Remove the separate back protector in your garment, if present, when wearing the airbag (a back protector is included in the airbag) and adjust all straps on the body to the widest position.