Revit Airwave 4, veste en textile

prepared for Airbag

Revit knows how important it is to keep a cool head on hot rides. Not only will your senses stay sharp on the handlebars, but fatigue won't set in so quickly, and you can enjoy life on the road to the full. That's why Revit designed the Airwave 4, an adventure sports jacket that lets you feel the wind on your body.

Ventilation is the be-all and end-all

As the name suggests, the Airwave 4 is all about - you guessed it - air. More specifically, it's about directing it onto your body when you set off on your next adventure. The combination of softshell, ripstop, PWR|Shell Mesh and ballistic mesh with large/visible ventilation inserts leaves no doubt as to what you're getting with this jacket: Air permeability to the last degree.

Safety first

The Airwave 4 is a long-time favorite in our collection, a customer favorite in the ventilated jacket category. It has Class AA certification thanks to SEESOFT elbow and shoulder protectors and the option to add chest and back protectors. There are laminated reflectors on the forearms, shoulders and back to increase your visibility in low light conditions.

Features

• Fit - Regular fit
• Drawstring for adjustment at the waist
• Adjustment straps on the forearm
• Elastic waist
• Flexisnap on the collar
• Two inside pockets
• Two front slit pockets
• Concealed press-stud on the collar
• Jeans loop
• Short connecting zipper
• Soft collar edge
• V-shaped cover strip at the cuffs

Outer fabric

• 3D Air Mesh
• PWR|Shell mesh
• Softshell 3L

Lining

• Mesh

Visibility

• Laminated reflectors on the forearms
• Laminated, reflective material
• Laminated, reflective logo on the back

Ventilation

• Fully ventilated mesh

Protection

• 3D mesh protector pockets
• Prepared for two-piece SEESOFT Level 1 chest protector
• Prepared for SEESOFT Level 2 back protector
• Prepared for Avertum Tech-Air® airbag system - ONE SIZE UP
• SEESMART Level 1 elbow protectors
• SEESMART Level 1 shoulder protectors

Regular fit

Regular fit stands for high wearing comfort and adapts to different body shapes and sizes, but is not considered loose. It does not emphasize the user's figure, but falls around the body.

Prepared for TECH-AIR® airbag system - One Size Bigger

If you want to wear a garment that is labeled "Ready for Avertum Tech-Air®️ airbag system", you must be sure that the garment can absorb the expansion of the airbag. We therefore recommend that you follow the fit guide below:

1. measure the chest circumference and divide the value by two
2. measure the garment flat on the chest line
3. if the difference between point 1 and point 2 is twelve centimeters or more, the garment is suitable for wearing over the airbag.

Note: Please ensure that you buy the garment in the correct size so that the shoulder and elbow protectors fit correctly and provide optimum protection in the event of an accident. To create space for the airbag to expand, you can remove any separate layers (thermal lining, waterproof lining) that may restrict the expansion of the airbag in the event of a fall. Remove the separate back protector in your jacket, if present, when you are wearing the airbag (a back protector is included in the airbag) and adjust all the adjustment straps on the body to the widest position.

Concealed press-stud on the collar

Invisible press-stud fastening on the collar for aesthetic reasons.

Jeans loop

With the loop on the back, the jacket can be attached to your jeans and therefore won't ride up, making bare-backed riding a thing of the past.

Flexisnap

The REV'IT! Flexisnap makes it easy to adjust the collar circumference and adapt the fit to every rider. A jacket is often worn for more than one season, and the Flexisnap makes it possible to adjust the collar within seconds. In winter, a wider collar circumference allows the jacket to be combined with a balaclava or wind collar, while in summer a wider circumference allows the all-important cooling wind into the collar.

Connection zipper

Its job is to create a secure connection between your trousers/jeans and your jacket/shirt. The jacket cannot ride up and your back remains covered in all situations.

Soft collar edge

The inside of the collar is lined with a soft fabric for greater comfort.

Prepared for two-piece SEESOFT Level 1 chest protector

The pocket in this REV'IT! piece is tailor-made for the SEESOFT Level 1 two-piece chest protector - a simple upgrade for even more safety.

Prepared for SEESOFT Level 2 back protector

The back pocket in this REV'IT! piece is tailor-made for the SEESOFT Level 2 back protector type RV - a simple upgrade for even more safety.

SEESMART™

SEESMART™ protectors offer maximum flexibility. At the same time, they fulfill impact tests according to EN 1621-1:2012 Level 1 at both normal and high (T+) ambient temperatures.

3D Air Mesh

This knitted fabric has an open, three-dimensional structure that ensures good ventilation when riding. 3D AirMesh is a must for long-distance riders.

Polyester ripstop with Teflon® coating

Polyester yarns woven into a ripstop fabric. Thick reinforcing threads are woven into the fabric at regular intervals in a cross-hatch pattern known as ripstop.

PWR|Shell mesh

This PWR|Shell is knitted in an open structure to ensure air permeability and flexibility, providing comfort and safety in equal measure.

Laminated reflectors on the forearms

Retroreflective, fluorescent coating on the underarms for better visibility and more safety in low light conditions.

Laminated, reflective material

Reflective panels ensure excellent visibility so that the wearer can be seen from any direction. The reflective panels are welded to the fabric for a more elegant look. This also saves on seams, which benefits safety.

Laminated, reflective logo on the back

This product features a reflective logo on the back of the garment to make motorcyclists more visible in low light, bad weather and/or at night.

Care instructions

• Machine wash 30°C, gentle cycle
• Do not bleach
• Do not tumble dry
• Do not iron
• Do not dry-clean

Warnings

• Do not use fabric softener