Macna Empire 2.0, veste textile imperméable pour femmes

A mesh jacket with a detachable liner, further developed for urban riders in warm conditions.

The Empire 2.0 is further developed for warm riding conditions with a ton of 3D-mesh fabric to ensure enough airflow past your body – impact areas like elbows and shoulders being the exception.

It is fitted with a detachable Raintex ML membrane which is comfortable on the skin as it’s laminated against comfy mesh fabric. This prevents the membrane from sticking to your skin when riding with short sleeves or sleeveless gear underneath.

The membrane is connected through Macna's Easy Cuff™ system; a zip solution that prevents loose, floating layers inside your jacket and your hands from getting stuck when putting your jacket on.

To prevent your jacket from creeping up in case of an incident, Macne fitted the Belt Loop™; a strong piece of webbing that enables easy connection between your jacket and belt.

At the bottom of the main zip you’ll find Macna's Zip Grip™, a triangular reinforcement that makes inserting and zipping up a lot easier – even with gloves on!

The push buttons at the upper arms require only two fingers to use, making them easy to adjust. Quixnaps™ is what Macna calls these ‘quick-snaps’.

Macna's RISC™ Level 1 impact protectors are present at the shoulders and elbows. RISC™ back and chest protectors are separately available and can easily be placed in the designated compartment. Be sure to check the size table before purchasing a back protector.

Additionally, this jacket is prepared for Macna's MUPBP-1 P.A.L.S. base plate. This accessory can be attached to the lower back of the jacket to enable expansion of luggage capacity. The base plate contains the Pouch Attachment Ladder System that enables Macna's utility bags to be worn on the body.

Features

• Softshell Lite, Micro mesh, Fybrex and Coated Ripstop outer
• Mesh liner
• Detachable Raintex ML waterpoof membrane
• Ventilated
• Air Burst™
• Adjustable waist strap
• Adjustable strap upper arm
• Adjustable cuff
• Zip Grip™
• Quixnap™
• Easy Cuff™
• P.A.L.S. Hip bag prepared
• P.A.L.S. base plate prepared
• Belt Loop™
• RISC™ Level 1 shoulder protector (S01, S02, S03)
• RISC™ Level 1 elbow protector (KE01, KE02, KE03)
• RISC™ chest protector prepared
• RISC™ back protector prepared
• Class A certified

Micro Mesh

Strong polyester mesh with a fine knitted structure which provides ventilation and gives an unique appearance.

Fybrex

Polyester 500D fabric with high density that is durable, strong and abrasion-resistant.

Raintex ML

The latest addition to Macna’s waterproof membrane collection is Raintex ML, which prevents rainwater from penetrating whilst enabling vapor drops to make their way through. These membranes keep you free from both sweat and rainwater, and are more comfortable than a regular Raintex membrane.

ML stands for ‘mesh laminated’, which means the waterproof membrane is laminated directly against a layer of fine mesh fabric. This fabric is comfortable on the skin as it doesn’t get sticky when riding with a t-shirt underneath, opposed to traditional membrane variants.

These membranes are incorporated into Macna’s waterproof garments in different ways. Some feature a fixed membrane and others are fitted with a detachable one. There are also jackets with a waterproof liner, which means the waterproof membrane and thermal liner are combined to create a single layer.

Air Burst™

Back in the day, you needed to open up your main zip if you wanted to cool down. Luckily, those days are over as Macna’s gear has been fitted with ventilation zips, panels and outlets for many years now. But sometimes, all those options still weren’t enough.

That’s why Macna evolved their mesh fabric to the next level, or actually another dimension all together. The third-dimension mesh fabric of Air Burst™ creates a breathable layer between the body and outside of the shell, which enables a better intake of cool air to cool the body. 3D mesh also slows you down gently and in one piece before your skin comes into contact with the road.

Zip Grip™

Zipping up without gloves isn’t always a success at first try. Inserting one part into another turns out to be surprisingly difficult for the most intelligent species on the planet. Some of us even try this sport with their gloves on – with little success in most cases.

Macna’s Zip Grip™ is a triangular reinforcement at the base of the main zip. This reinforcement is easy to get a hold of and provides the needed grip when inserting. Zipping up has just become child’s play, even with gloves on!

Quixnap™

Snaps, studs, buttons; they’re present in motorcycle garments in all kinds of shapes, sizes, and colours. Even though there are countless differences between all of them, there’s one thing they have in common: you need two hands to close them.

Quixnap™ is the latest and most user-friendly snap on the market. It is easy to use for anybody with a minimum of two fingers, which may even be located on the same hand. That’s all there is to it!

Easy Cuff™

Loops and snaps that are supposed to neatly connect the separate layers of a jacket or pants. We all know how well that works; it doesn’t. Chances of your watch or foot getting stuck are ten times higher than of you actually putting on the garment without issues.

Make this issue a complaint of the past with Macna’s Easy Cuff™, a zip construction at the cuff that keeps the layers fixed and ensures a nice and tidy sleeve. The zip is located at the outside of the cuff, making it easily accessible when needed.

P.A.L.S.

Even today, there’s not a lot of choice when it comes to wearable luggage options for motorcyclists. That’s where Macna’s utility-style gear comes in.

The garments and accessories in this new segment feature P.A.L.S. webbing or are prepared for Mana’s P.A.L.S. baseplate. This enables their utility bags and pouches to be attached in order to expand luggage capacity.

P.A.L.S. stands for Pouch Attachment Ladder System. The last two words refer to the webbing, which enables the first two words; attaching pouches.

P.A.L.S. MUHB-1 Hip Bag

The MUHB-1 hip bag can be fitted on Macna’s utility P.A.L.S. base plate or MUBP backpack in order to increase baggage capacity.

P.A.L.S. MUPBP-1 Base Plate

The utility P.A.L.S. base plate can be fitted onto prepared jackets and enables M.O.L.L.E gear – like the bags below – to be placed in order to expand baggage capacity.

Belt Loop™

Wearing jeans on a sports- or naked bike can get a bit chilly when your jacket decides to creep up on you. Being cold is one thing, getting hurt is another. In case of an incident, you might end up on your back without your jacket covering it.

Raise your comfort and safety with Macna’s Belt Loop™. It is made of strong webbing that is secured at the top of the back and runs all the way down your jacket, where you can connect it to your belt. The Belt Loop™ keeps your jacket in place, prevents a cold back, and raises your safety in case of an incident.

R.I.S.C.™ Protectors

A garment can be fitted with Level 1 or Level 2 protectors, depending on which segment you’re going for. Level 2 protectors are thicker and heavier than Level 1, but in turn they provide better protection. Both levels of RISC protectors are interchangeable and separately available, so you can easily scale down or up if you’d like to.

R.I.S.C.™ Back Protector

You won’t find chest and back protectors in Macna’s garments – with exception of protective jackets such as the Korus and Whizzar – but they are separately available should you fancy extra protection. Make sure to check out the size table if you’re thinking about purchasing a Level 2 back protector.

R.I.S.C.™ Chest Protector

This unique protector is only available in Level 1 and consists of two separate pieces that automatically interlock after placing them in the designated compartments of your Macna jacket and zipping up.