avec plus de 200.000 articles
à un prix avantageux
avec garantie de remboursement
service à la clientèle
à partir de 75 €
Traduction automatique
Texte original in English
Revit Parallax, veste en cuir/textile
Réf. : 11085672
Performance optique
- Fit - Coupe ajustée
- Sangles de réglage à la taille
- Poche intérieure Napoléon
- Pochette à la taille
- Trois poches intérieures
- Poignets confort
- Zipper sur les poignets
- Boucle de jean
- Longue fermeture à glissière de connexion
- Courte fermeture à glissière de connexion
- Bord de col doux
- Poignet extensible
- Extension sur les emmanchures
- Stretch au niveau des manches
- Extrémité à l'épaule
- Extension à la taille
Matière supérieure
- Nubuck artificiel
- Cuir de vache
- Polyester stretch
Alimentation
- Doublure en mesh
Visibilité
- Le logo réfléchissant au dos
Insolation
- Chauffe-corps thermique amovible
- Protection contre le vent derrière la fermeture à glissière des poignets
- Protection contre le vent derrière la fermeture à glissière avant
Ventilation
- Perforation sur la partie supérieure de l'avant
Protection
- Préparé pour le protège poitrine deux pièces SEESOFT Niveau 1
- Préparé pour le protecteur dorsal SEESOFT Niveau 2
- Coutures de sécurité
- Protection des épaules SEESMART Niveau 1
- Protecteurs de coude SEESMART Niveau 1
- Protecteurs en TPU sur l'épaule
- Certifié selon la norme de sécurité EN 17092:2020, classe de protection AA
Ajustement serré
La fermeture à glissière sur la manchette a plusieurs fonctions. Premièrement, elle permet d'entrer facilement dans la manche, deuxièmement, elle offre une ventilation supplémentaire par temps chaud et troisièmement, elle permet de porter la manchette du gant entre la veste et la membrane.< ; /p>
Boucle de jean
Grâce à la boucle située dans le dos, la veste peut être reliée à votre jean et ne remonte donc pas, conduire le dos nu fait partie du passé.
La veste peut être reliée à votre jean et ne remonte pas, ce qui permet de conduire le dos nu.
Glissière de connexion
L'intérieur du col est doublé d'un tissu doux pour plus de confort.
Pare-vent derrière la fermeture à glissière
Il y a une bande de recouvrement coupe-vent derrière la fermeture à glissière avant.
La fermeture à glissière avant est doublée d'une bande de recouvrement coupe-vent.
Préparé pour le protège poitrine SEESOFT niveau 1 en deux parties
Le sac de cette pièce REV’IT ! Piece est taillé sur mesure pour le protège-poitrine en deux parties SEESOFT Level 1 &ndash ; une simple mise à niveau pour encore plus de sécurité.
Pièce REV’IT !
Préparé pour la protection dorsale SEESOFT Niveau 2
Pièce REV’IT !
Coutures de sécurité
Les protecteurs SEESMART&trade ; offrent un maximum de flexibilité. En même temps, ils satisfont aux tests d'impact conformément à la norme EN 1621-1:2012 niveau 1 à des températures ambiantes normales et élevées (T+).
Cuir nubuck
Le cuir nubuck est un cuir de vachette pleine fleur qui a été poncé ou poli du côté de la fleur (à l'extérieur) pour créer une surface semblable à du velours. Le cuir nubuck est similaire au daim, mais sa texture est plus fine et donc plus durable.
Cuir de vache
Le cuir de vachette est utilisé dans ce vêtement pour un ajustement et une protection optimaux.
Le logo réfléchissant sur le dos
Les panneaux réfléchissants assurent une excellente visibilité, de sorte que le porteur peut être vu de n'importe quelle direction. Pour un look plus sophistiqué, les panneaux réfléchissants sont soudés au tissu. Cela permet également d'économiser des coutures, ce qui améliore la sécurité.
Lavage et entretien
Outershell
- Ne pas laver
- Ne pas blanchir
- Ne pas sécher en machine
- Ne pas repasser
- Ne pas nettoyer à sec
Doublure thermique amovible
- Lavage en machine à 30°C, cycle doux
- Ne pas blanchir
- Ne pas sécher en machine
- Ne pas repasser
- Ne pas nettoyer à sec
Composition matérielle
78% cuir, 17% polyamide, 3% polyester, 2% élasthanne
Cette pièce a été fabriquée à partir d'une matière première de qualité supérieure.
Revit Parallax, leather/textile jacket
Article No.: 11085672
The Parallax is best described as a sporty vintage jacket in a hybrid style. She takes a retro-inspired leather and ensures that you can ride into the future with her. Complete with an AA rating.
Optical performance
The Parallax jacket is all about appearance. It's all about optical performance. Revit uses highly abrasion-resistant cowhide as the outer material - together with artificial nubuck – giving it a used look right from the start. Over time, it will continue to change and adapt to your body contours.
Performance on the road
A good-looking jacket wouldn't fit into our range if it didn't cut a good figure on the street. The Parallax has protectors on the shoulders and elbows, as well as TPU hard shells on the shoulders. Thanks to the removable thermal vest and windbreaker behind the front zipper, it's not just suitable for summer.
Features
- Fit - Tight fit
- Adjustment straps at waist
- Napoleon inside pocket
- Slip pocket at waist
- Three inside pockets
- Comfort cuffs
- Zipper on the cuffs
- Jeans loop
- Long connecting zipper
- Short connection zipper
- Soft collar edge
- Stretchy cuff
- Stretch on the armholes
- Stretch in the sleeves
- Stretch at the shoulder
- Stretch at waist
Upper material
- Artificial nubuck
- Cowhide
- Polyester stretch
Food
- Mesh lining
Visibility
- Reflective logo on the back
Insulation
- Removable thermal body warmer
- Wind guard behind cuff zipper
- Wind guard behind the front zipper
Ventilation
- Perforation on the upper front
Protection
- Prepared for two-piece SEESOFT Level 1 chest protector
- Prepared for SEESOFT Level 2 back protector
- Safety seams
- SEESMART Level 1 shoulder protectors
- SEESMART Level 1 elbow protectors
- TPU protectors on the shoulder
- Certified according to safety standard EN 17092:2020, protection class AA
Tight fit
Tight Fit is designed so that the pants fit snugly and adapt to the rider's body shape. The contoured design ensures the fabric moves with the body without restricting independence in any situation. This fit is primarily found in base layers and in our race-oriented garments.
Zipper on cuff
The zipper on the cuff has several functions. Firstly, it ensures easy entry into the sleeve, secondly, it offers additional ventilation on warm days and thirdly, it makes it possible to wear the glove cuff between the jacket and the membrane.< /p>
Jeans loop
With the loop on the back, the jacket can be connected to your jeans and therefore does not ride up, driving with your bare back is a thing of the past.
Connection zipper
Its job is to create a secure connection between your trousers/jeans and your jacket/shirt. The jacket cannot ride up, your back remains covered in all situations.
Soft collar edge
The inside of the collar is lined with a soft fabric for greater comfort.
Wind guard behind the front zipper
There is a wind-blocking cover strip behind the front zipper.
Prepared for two-part SEESOFT Level 1 chest protector
The bag in this REV’IT! Piece is tailor-made for the two-part chest protector SEESOFT Level 1 – a simple upgrade for even more security.
Prepared for SEESOFT Level 2 back protector
The back pocket in this REV’IT! Piece is tailor-made for the SEESOFT Level 2 back protector type RV - a simple upgrade for even more security.
Safety seams
The seams determine the resistance of a motorcycle garment in the event of a fall. That's why REV’IT! In areas at risk of falling, only safety seams. These have a visible and an invisible hem. This structure holds the outer shell together even if the visible seam is frayed.
SEESMART™
SEESMART™ Protectors offer a maximum of flexibility. At the same time, they meet impact tests according to EN 1621-1:2012 Level 1 at both normal and high (T+) ambient temperatures.
Nubuck leather
Nubuck leather is full-grain cowhide leather that has been sanded or polished on the grain side (outside) to create a velvet-like surface. Nubuck leather is similar to suede, but has a finer texture and is therefore more durable.
Cowhide
Cowhide leather is used in this garment for optimal fit and protection.
Reflective logo on the back
Reflective panels ensure excellent visibility, so the wearer can be seen from any direction. For a more sophisticated look, the reflective panels are welded to the fabric. This also saves seams, which improves safety.
Wash & care
Outershell
- Do not wash
- Do not bleach
- Do not tumble dry
- Do not iron
- Do not dry-clean
Removable thermal liner
- Machine wash 30°C, mild cycle
- Do not bleach
- Do not tumble dry
- Do not iron
- Do not dry-clean
Material composition
78% leather, 17% polyamide, 3% polyester, 2% elastane
Produits adaptés
Revit Apex, pantalon en cuir | PVC $ 411.24$ 370.03 |
Revit Fuse H2O, bottes courtes imperméables PVC $ 182.7730% économisés$ 127.03 | PVC $ 182.7730% économisés$ 127.03 |
Revit Link GTX, bottes Gore-Tex | PVC $ 246.74$ 221.98 |
Accessoires
Revit Seesoft RV, insert de protection dorsale Niveau 2 | $ 38.37 |
Revit Seesoft DC, protecteur de poitrine 2pcs. Niveau 1 | $ 29.24 |
Pièces de rechange
Revit Seesmart RV34, protecteurs d'épaules et de coudes Niveau 1 | $ 20.10 |
Revit Seesmart RV35, Protecteurs de coudes Niveau 1 | $ 27.41 |