met meer dan 200.000 artikelen
voordelig
met geld terug-garantie
in 1A-kwaliteit
vanaf 75€
Automatische vertaling
Originele tekst in English
![](/media/products/images_upload/Highsider_E-marked.png)
Highsider LED, dagrijlicht/positielicht
Art.-nr.: 11083754
E-goedgekeurd
De LED-dagrijverlichting met 4 power-LED's en parkeerlichtfunctie zorgt ervoor dat motorrijders goed worden waargenomen door andere weggebruikers. Verpakt in een matzwarte, rechthoekige aluminium behuizing, is de dagrijverlichting vervaardigd voor universele montage. Met deze dagrijverlichting schakelt het licht over naar de gedimde parkeerlichtmodus wanneer het op dimlicht wordt gezet, E-keurmerk.
Zien en gezien worden - geef je motor persoonlijkheid! Het ongewone ontwerp en de perfecte technologie van de HIGHSIDER koplampserie maken van jou zeker een sensationeel hoogtepunt!
Afmetingen
- Breedte: 150 mm
- Hoogte: 38 mm
- Diepte: 39,5 mm
Technische specificaties
- Stroomverbruik bij 12,5 volt: max. 0,4 ampère aan (gelijk aan ongeveer 5 watt)
- Lichtstroom bij 12 volt: 250 lumen
Aansluitingen
- Zwarte kabel: massa (-)
- Rode kabel = plus (+), is verbonden met ingeschakelde plus (ontsteking).
- Witte kabel = is verbonden met de stuurleiding van het dimlicht.
Omvang van de levering
- 1 stuk dagrijverlichting 222-501
Aanwijzing 1 - met bestaande lichtschakelaar
- Bediening van het HIGHSIDER LED dagrijlicht vereist een handmatig geschakeld dimlicht via een lichtschakelaar.
- Het dagrijlicht moet zo worden aangesloten dat het uitgaat als de hoofdkoplamp wordt ingeschakeld (uitzondering: bediening van de koplampflitser). Het achterlicht moet altijd aan blijven, d.w.z. op contact plus staan.
- Voorzichtig: Alle andere parkeerlichten die op het voertuig aanwezig zijn, moeten worden losgekoppeld, omdat er maximaal 2 parkeerlichten op het voertuig mogen worden gebruikt.
Aanwijzing 2 - zonder bestaande lichtschakelaar
- De dagrijverlichting kan ook worden gebruikt op voertuigen zonder lichtschakelaar. Hiervoor zijn bijvoorbeeld de volgende onderdelen nodig:
- Schakelaar: Nr. 240-044
- HIGHSIDER DRL CONTROL- BOX CB1 : Nr. 208-108 (schakelt tussen dimlicht en dagrijlicht)
Highsider LED, daytime running light/position light
Article No.: 11083754
E-approved
The LED daytime running light with 4 power LEDs and parking light function ensures that bikers are well perceived by other road users. Packaged in a matte black, rectangular aluminum housing, the daytime running light is manufactured for universal mounting. With this daytime running light, the light switches to dimmed parking light mode when switched to low beam, E-approved.
See and be seen - give your bike personality! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely make you a sensational highlight!
Dimensions
- Width: 150 mm
- Height: 38 mm
- Depth: 39.5 mm
Technical specifications
- Current consumption at 12.5 volts: max. 0.4 amps on (equivalent to approx. 5 watts)
- Luminous flux at 12 volts: 250 lumens
Connections
- Black cable: ground (-)
- Red cable = plus (+), is connected to switched on plus (ignition).
- White cable = is connected to the control line of the low beam.
Scope of delivery
- 1 piece daytime running light 222-501
Note 1 - with existing light switch
- Operation of the HIGHSIDER LED daytime running light requires a manually switched low beam via a light switch.
- The daytime running light must be connected so that it goes out when the main headlight is switched on (exception: operating the headlight flasher). The rear tail light must always remain switched on, i.e. set to ignition plus.
- Caution: Any other parking lights present on the vehicle must be disconnected, as a maximum of 2 parking lights may be used on the vehicle.
Note 2 - without existing light switch
- The daytime running light can also be used on vehicles without a light switch. For this purpose, the following components are required, for example:
- Switch: No. 240-044
- HIGHSIDER DRL CONTROL- BOX CB1 : No. 208-108 (switches between low beam and daytime running light)