avec plus de 200.000 articles
à un prix avantageux
avec garantie de remboursement
service à la clientèle
Cadeaux gratuits
Détails de l'article
Traduction automatique
Texte original in English
CTEK MXS 3.8 EU, chargeur de batterie
Réf. : 11093789
- &bull ; Charge d'entretien pour les batteries jusqu'à 130 Ah
- &bull ; Résistant aux éclaboussures et à la poussière (IP65)
- &bull ; Ne produit pas d'étincelles
- Résistant aux courts-circuits
- Processus de chargement entièrement automatique en 7 étapes “click and connect”
- Programmes pour les petites batteries et les batteries normales, ainsi que pour le temps froid
- Charge de batteries jusqu'à 85 Ah
- Protection contre l'inversion de polarité
- Garantie de 5 ans
Données techniques
- Catégorie de charge : charge en courant alternatif
- Fiche EU
- Entrée : 220–240 VAC, 50–60 Hz, 0.5 A
- Sortie : 14,4 /14,7 V, 3,8 A
- Chimie de la batterie : plomb-acide
- Type de batterie 12 V : WET, MF, Ca/Ca, AGM, GEL
- Capacité de la batterie : 1,2–130 Ah
- Courant de décharge arrière : Moins de 1 Ah/mois
- Tension de la batterie : 12 V
- Température ambiante : -20 °C à +50 °C
- Tension de démarrage : 2,0 V
- Ondulation : Moins de 4 %
- Classe IP : IP65
- Garantie : 5 ans
Etendue de la livraison
- Chargeur MXS 3.8 EU
- 56-260 Oeillet de connexion M6
- 56-262 Pince de connexion
Courant de décharge arrière
Le courant de décharge arrière est le courant par lequel la batterie se décharge lorsque le chargeur n'est pas connecté à l'alimentation. Les chargeurs CTEK ont un courant de décharge arrière très faible.
Tension de charge et courant de charge
La qualité de la tension et du courant de charge est très importante. Une forte ondulation du courant chauffe la batterie et vieillit l'électrode positive. Une ondulation de tension élevée peut endommager d'autres équipements connectés à la batterie. Les chargeurs de batterie CTEK produisent une tension et un courant très propres avec une faible ondulation.
CTEK MXS 3.8 EU, battery charger
Article No.: 11093789
The MXS 3.8 is an advanced battery charger with maintenance charging function. It has adjustable programs for adapting to different battery sizes, as well as special programs for desulphation and charging in cold environments.
The MXS 3.8 is a 7-stage, microprocessor-controlled charger with a maintenance charging function for batteries between 1.2 Ah and 85 Ah. The range of functions includes battery diagnostics to determine whether the battery can accept and hold a charge, a patented desulphation program and a “snowflake” program for charging in cold environments. There are also adjustable programs for charging smaller and normal-sized batteries. The MXS 3.8 uses CTEK's patented Float/Pulse system. This is the most efficient maintenance charging mode when a battery is left connected to the charger for long periods. The MXS 3.8 is easy to use and the entire charging process can be monitored on the clear, easy-to-read display.
Features
- • Maintenance charging for batteries up to 130 Ah
- • Splashproof and dustproof (IP65)
- • Non-sparking
- Short-circuit proof
- Fully automatic, 7-step “click and connect” charging process
- Programs for small and normal batteries as well as cold weather
- charging of batteries up to 85 Ah
- Reverse polarity protected
- 5-year warranty
Technical data
- Charging category: charging with alternating current
- EU plug
- input: 220–240 VAC, 50–60 Hz, 0.5 A
- output: 14.4 /14.7 V, 3.8 A
- Battery chemistry: lead-acid
- Battery types 12 V: WET, MF, Ca/Ca, AGM, GEL
- Battery capacity: 1.2–130 Ah
- Back discharge current: Less than 1 Ah/month
- Battery voltage: 12 V
- Ambient temperature: -20 °C to +50 °C
- Start voltage: 2.0 V
- Ripple: Less than 4 %
- IP class: IP65
- Warranty: 5 years
Scope of delivery
- MXS 3.8 EU charger
- 56-260 Connect Eyelet M6
- 56-262 Connect Clamp
Back discharge current
The back discharge current is the current by which the battery discharges when the charger is not connected to the power supply. CTEK chargers have a very low back discharge current.
Charging voltage and charging current
The quality of the charging voltage and charging current is very important. High current ripple heats the battery and ages the positive electrode. High voltage ripple can damage other equipment connected to the battery. CTEK battery chargers produce a very clean voltage and current with low ripple.
Meilleure vente
Avis des clients
As-tu expérimenté l\'article?





















































