met meer dan 200.000 artikelen
voordelig
met geld terug-garantie
in 1A-kwaliteit
krijgen
Artikeldetails
Automatische vertaling
Originele tekst in English
Gaerne GP1 LS, laarzen
Art.-nr.: 11091851
De GP1 LS raceschoen is het nieuwste product van het Gaerne onderzoeks- en ontwikkelingscentrum. Deze ultieme racelaars is ontwikkeld in nauwe samenwerking met kampioenen, de nieuwste technologische innovaties, aandacht voor detail en comfort, Italiaanse styling en meer dan vijftig jaar passie en ervaring in de racerij.
De sportieve look en robuuste materialen zijn speciaal aangepast aan de zware eisen van de racerij. Met de GP1 LS ben je in het bezit van een echte raceschoen die wordt gebruikt op de MotoGP-racecircuits.
De GP1 LS motorlaars is gemaakt van het soepele, comfortabele en ademende hightech materiaal Lorica. Dit model is voorzien van het eigen GAERNE FLOATING-systeem van koolstofmateriaal. Het systeem is op twee punten aan de achterkant van de laars bevestigd. Het zorgt ervoor dat de drager zo natuurlijk mogelijk kan bewegen en dat de voet niet kan verdraaien, zonder dat dit ten koste gaat van de flexibiliteit. Externe protectoren minimaliseren de gevolgen van een crash.
De al zeer veilige eigenschappen van de GP1 worden aangevuld met een antischokhielinzetstuk. Het schokabsorberende inzetstuk bestaat uit een niet-vervormbare polyurethaan hielcup, die bovendien wordt beschermd door een verwisselbare en wrijvingsarme magnesium kap. De antischokhak heeft een interne comfortverhogende decompressiezone tussen de binnenzool en de zool. Dit wordt aan de buitenkant benadrukt door de rode inzetstukken.
Dankzij de ademende, antibacteriële en voorgevormde binnenvoering is er altijd een optimaal draagcomfort. Naast het microklimaat spelen ook comfort en bewegingsvrijheid een grote rol. Daarom integreerden de ontwikkelaars elastische inzetstukken en een traploos instelbare kuitwijdteregeling in het BOA-sluitsysteem. Met deze twee functies kan de drager de laars perfect aan zijn voet aanpassen.
Om ervoor te zorgen dat de laars niet beschadigd raakt wanneer de motorfiets wordt gekanteld en de gewenste houding wordt aangenomen, is er een magnesium teenschuiver aan de punt van de laars, die snel en gemakkelijk kan worden vervangen. Tot slot zorgt een zool met meerdere dichtheden voor optimale grip en voorkomt zo mogelijk uitglijden. Al met al biedt de GP1 LS de drager optimale bescherming.
Functies
- Gemaakt van Lorica, een soepel, slijtvast en ademend hightech materiaal
- GAERNE FLOATING systeem voor veiligheid en flexibiliteit
- Schokabsorberende anti-schok hak inzetstuk
- Gelkussentjes bij de enkels
- Vervangbare scheenbeschermer met twee schroeven
- Verstelbaar en vervangbaar BOA-sluitsysteem voor individuele aanpassing in de kuitzone
- Bovenwerk van luchtdoorlatend en hittebestendig PU
- Inwendige rits met klittenbandafdekking
- Rubberen inzetstukken op kuit en hiel voor extra ondersteuning en bescherming tegen motor-/uitlaathitte
- Schachthoogte ca. 30 cm
- Ademende voorgevormde binnenvoering
- Anatomisch gevormde polyurethaan schakelversteviging
- Vervangbare en wasbare binnenzool
- Anatomisch gevormd voetbed met schokabsorberende inlegzool
- Makkelijk te vervangen glijder van extreem slijtvast magnesium
- Petrol- en oliebestendige zool in een uniek ontwerp met uitstekende grip
- Buckles, zolen, voetbedden en sliders verkrijgbaar als accessoires
- Gecertificeerd volgens EN 13634:2017
- Gemaakt in Italië
Gaerne GP1 LS, boots
Article No.: 11091851
The GP1 LS racing boot is the latest product from the Gaerne research and development center. This ultimate racing boot was developed in close collaboration with champions, the latest technological innovations, attention to detail and comfort, Italian styling, and over fifty years of passion and experience in racing.
The sporty look and robust materials have been specially adapted to the tough demands of racing. With the GP1 LS, you own a real racing boot that is used on the MotoGP race tracks.
The GP1 LS motorcycle boot is made of the supple, comfortable and breathable high-tech material Lorica. This model features the in-house GAERNE FLOATING system made of carbon material. The system is attached to the back of the boot at two points. It allows the wearer to move as naturally as possible while also ensuring that the foot cannot twist, without compromising flexibility. External protectors minimize the effects of a crash.
The already very safe features of the GP1 are complemented by an anti-shock heel insert. The shock-absorbing insert consists of a non-deformable polyurethane heel cup, which is additionally protected by a replaceable and low-friction magnesium cap. The anti-shock heel has an internal comfort-enhancing decompression zone located between the insole and sole. This is emphasized from the outside by the red inserts.
Thanks to the breathable, antibacterial and preformed inner lining, there is an optimal wearing comfort at all times. In addition to the microclimate, comfort and freedom of movement also play a major role. To this end, the developers integrated elastic inserts and a continuously adjustable calf width regulation system with the BOA closure system. These two features allow the wearer to adjust the boot perfectly to his foot.
To ensure that the boot is not damaged when the motorcycle is tilted and the required posture is adopted, there is a magnesium toe slider at the tip of the boot, which can be quickly and easily replaced. Finally, a multi-density sole provides optimal grip and thus prevents possible slipping. All in all, the GP1 LS offers the wearer optimal protection.
Features
- Made of Lorica, a supple, abrasion-resistant and breathable high-tech material
- GAERNE FLOATING system for safety and flexibility
- Shock-absorbing anti-shock heel insert
- Gel cushions at the ankles
- Replaceable shin guard with two screws
- Adjustable and replaceable BOA closure system for individual adjustment in the calf area
- Upper made of air-permeable and heat-resistant PU
- Internal zipper with Velcro cover
- Rubber inserts on calf and heel for added support and protection against engine/exhaust heat
- Shaft height approx. 30 cm
- Breathable preformed inner lining
- Anatomically shaped polyurethane gear shift reinforcement
- Replaceable and washable insole
- Anatomically shaped footbed with shock-absorbing insert
- Easily replaceable slider made of extremely abrasion-resistant magnesium
- Petrol- and oil-resistant sole in a unique design with excellent grip
- Buckles, soles, footbeds and sliders available as accessories
- Certified according to EN 13634:2017
- Made in Italy
Bestseller
Klantenreviews
Hebt u ervaring met het artikel?
Geschreven door Mike k.cohen op 31.01.2026
Pasvorm: geen informatie
Good spot/track boot for a decent price. Gaernes quality is up there with the best.
Good spot/track boot for a decent price. Gaernes quality is up there with the best.





















































