met meer dan 200.000 artikelen
voordelig
met geld terug-garantie
in 1A-kwaliteit
krijgen
Artikeldetails
Automatische vertaling
Originele tekst in English
Macna Hybrid, koelvest
Art.-nr.: 11069375
Het Hybrid Cooling Vest is licht van gewicht en eenvoudig te (her)activeren. Het vest is geschikt voor multifunctioneel gebruik, zoals op het werk, tijdens het sporten en voor recreatieve toepassingen.
Het Hybrid vest is ontworpen om gedragen te worden op plaatsen waar geen extreem hoge omgevingstemperatuur heerst en werkt het beste bij een lage tot gemiddelde luchtvochtigheid. De hoeveelheid luchtstroom op het lichaam bepaalt het verkoelende effect en de duur.
Door het in water onder te dompelen kan het Hybrid vest als nat koelvest worden gebruikt, maar is het ook voorbereid op de apart verkrijgbare Macna Cool Packs. Deze zijn verkrijgbaar in 21˚ en 29˚ en 37° versies.
Activering - Nat
- Dompel het product gedurende 1 à 2 minuten in water.
- Dan voorzichtig het overtollige water eruit knijpen.
- Doe tot slot de waterafstotende voering (vest / hoofdbedekking) droog met een handdoek voor gebruik. En u bent klaar om te gaan.
Het koelmateriaal van het Hybrid Cooling Vest is ontworpen voor maximaal 200 nat/droog cycli (activeringen). Na verloop van tijd neemt de waterabsorptie af, omdat de vezels in de stofstructuur samenklonteren.
Na de eerste 10 nat/droog cycli kan een vermindering van de waterabsorptie optreden; daarna blijft de absorptie relatief stabiel. Dit is een normaal proces. Het materiaal biedt nog steeds een zeer effectieve waterabsorptie, verdamping en dus koelvermogen.
De mate van absorptie wordt ook beïnvloed door de wijze van onderhoud van het product en de waterkwaliteit.
Activering - Cool Packs
De tijd die nodig is voor volledige activering hangt af van de temperatuur van de Cool Pack en de koelmethode:
- IJswater: ongeveer 20 minuten
- Diepvriezer: ongeveer 40 minuten
- Koelkast: ongeveer 60 minuten
U kunt ze ook activeren door ze bloot te stellen aan een omgevingstemperatuur die lager is dan:
- 19° C voor de Cool Pack 21° C
- 26° C voor de Cool Pack 29° C
- 34° C voor de Cool Pack 37° C
Welke koelmethode u ook kiest, u kunt de activeringstijd verkorten door de packs niet te stapelen, maar ze plat in één enkele laag te leggen. Als u ze direct uit de vriezer wilt gebruiken, kunnen ze te koud aanvoelen om te dragen. Daarom wordt aanbevolen ten minste vijf minuten te wachten, zodat ze kunnen opwarmen tot de ingestelde temperatuur van 21°C of 29°C, afhankelijk van het type PCM dat u hebt gekozen. Zodra het PCM deze temperatuur heeft bereikt, zal het deze urenlang vasthouden!
Features
- Gebaseerd op een unieke koeltechnologie
- Machinewasbaar en heeft antibacteriële eigenschappen
- Gemakkelijk te (her)gebruiken
- Lichtgewicht, niet-giftig en duurzaam
- Geeft tot 15° C verkoeling ten opzichte van de omgevingstemperatuur
- Geeft tot 2 tot 8 uur koeling, afhankelijk van temperatuur / luchtstroom / vochtigheid
- Geklasseerd als Categorie 1 PBM - alleen voor minimaal risico onder de Europese Richtlijn 89/686/EEG
Materiaalsamenstelling
buitenkant kledingstuk: 98% polyester, 2% overig
voering: 92% polyester, 6% polyurethaan, 2% overig
Macna Hybrid, cooling vest
Article No.: 11069375
The Hybrid Cooling Vest is lightweight and easy to (re)activate. The vest is suitable for multifunctional use, such as at work, during sports and for recreational applications.
The Hybrid vest is designed to be worn in places where there is not an extremely high ambient temperature and works best at low to medium humidity. The amount of airflow on the body determines the cooling effect and duration.
By immersing it in water the Hybrid vest can be used as a wet cooling vest, but is also prepared for the separately available Macna Cool Packs. These are available in 21˚ and 29˚ and 37° versions.
Activation - Wet
- Immerse the product in water for 1 to 2 minutes.
- Then gently squeeze out the excess water.
- Finally, wipe the water repellent liner (vest / head covering) dry with a towel before use. And you are ready to go!
The Hybrid Cooling Vest cooling material is designed for up to 200 wet/dry cycles (activations). Over time, the water absorption decreases, as the fibers cluster together in the fabric structure.
After the first 10 wet/dry cycles, a reduction in water absorption may occur; after that, absorption remains relatively stable. This is a normal process. The material still offers very effective water absorption, evaporation and thus cooling capacity.
The degree of absorption is also influenced by the method of maintenance of the product and the water quality.
Activation - Cool Packs
The time needed for full activation depends on the Cool Pack temperature and the cooling method:
- Ice water: approximately 20 minutes
- Freezer: approximately 40 minutes
- Refrigerator: around 60 minutes
You can also activate them by exposing them to an ambient temperature lower than:
- 19° C for the Cool Pack 21° C
- 26° C for the Cool Pack 29° C
- 34° C for the Cool Pack 37° C
Whichever cooling method you choose, you can reduce activation time by not stacking the packs, but to lay them flat in a single layer. If you want to use them straight from the freezer, they may feel too cold to wear. Therefore, it is recommended to wait at least five minutes so that they can warm up to their set temperature of 21°C or 29°C, depending on the type of PCM you have chosen. Once the PCM reaches this temperature, it will hold it for hours!
Features
- Based on a unique cooling technology
- Machine washable and has antibacterial properties
- Easy to (re)use
- Lightweight, non-toxic and durable
- Creates up to 15° C cooling in relation to ambient temperature
- Provides up to 2 to 8 hours of cooling, depending on temperature / air flow / humidity
- Classified as Category 1 PPE - only for minimal risk under the European Directive 89/686/EEC
Material composition
outer garment: 98% polyester, 2% other
lining: 92% polyester, 6% polyurethane, 2% other
Bestseller
Klantenreviews
Hebt u ervaring met het artikel?





















































