avec plus de 200.000 articles
à un prix avantageux
avec garantie de remboursement
service à la clientèle
Cadeaux gratuits
Détails de l'article
Traduction automatique
Texte original in English
Suomy SR-Sport, casque intégral
Réf. : 11040316
Coque extérieure en matière de tricarboco, mélange de Kevlar, de carbone et de fibres, en collaboration par le biais de résine et produites en 2 tailles (M e L), fabriqués à la main à l’aide de nouvelles technologies, qui prévoient des résines d’aramide.
Protection Interne en polystyrène doublure, disponibles en deux tailles (M et L). La forme particulière et la construction de différente densité augmente la résistance mécanique en cas de choc accidentel. Les canaux intérieurs étudiés dans la soufflerie garantissent une parfaite ventilation.
Le bouclier est thermoformé d’un drap plat en polycarbonate. Chaque bouclier est une pièce d’one-of-a-kind caractéristiques optiques inégalées et résistance mécanique. Grâce à ce procédé, la visière est anti rayures et anti brouillard et il n’y a pas besoin d’utiliser des lentilles supplémentaires sur la visière.
Anneau du système de rétention a étudié et breveté par Suomy, il a été étudié par milions d’utilisateurs finaux et c’est le meilleur système au monde.
La jugulaire est un anneau en D fermer en acier Inox et bouton pour régler la fermeture. Le bouton se trouve dans une zone entièrement gratuite et permet une utilisation facile même avec des gants : lorsque le bouton est fermé, la jugulaire crée une boucle, ce qui peut être utilisée comme un anneau à tirer la languette et défit le système de fermeture.
SR SPORT est homologué selon les règles : ECE 22-05 ; DOT ; JIS ; INMETRO NBR 7471
Coussinets de joues complètement démontable et lavable, en différentes épaisseurs pour une personnalisation complète du produit.
Coquille interne entièrement démontable et lavable, en différentes épaisseurs pour une personnalisation complète du produit.
La coque amovible interne a été étudiée pour un peuplement uniforme sur la tête.
Les canaux visibles permettent la circulation d’air pour vérifier la température à l’intérieur du casque et de laisser l’air chaud à travers la partie arrière.
Intérieur (coussinets de joues et doublure intérieure) sont entièrement en tissu COOLMAX® ACTIVE avec traitement INTERPOWER :
- Mèches de survêtement loin du corps.
- Maintient l’utilisateur frais, sec et confortable.
- Tissu léger, souple et respirant.
- Performances vérifiées et certifiées par ADVANSA.
L' entrée d’air arrière innovateur sur la SR SPORT a été conçu pour améliorer la ventilation à l’intérieur du casque, en utilisant les flux de l’air résiduel qui, encore une fois grâce à l’effet Venturi, sont en mesure de générer une dépression dans la partie inférieure du casque, dans ce façon assurer une extraction substantielle de l’air chaud à l’intérieur, par conséquent de maintenir une température confortable même à l’arrière de la tête (cou).
Le système de ventilation du SR SPORT, ainsi que de la forme spéciale de la coque interne, d’optimiser les flux de l’extérieurs et l’intérieures.
Nourris par l’intérieur de la ventilation d’air et à l’aide de l’effet Venturi, ils optimisent la ventilation interne. Le spoiler arrière a été étudié pour réduire la vibration du casque. Cela donne une diffusion uniforme du débit d’air à l’intérieur de la coquille.
Poids : ca 1250gr
Ce casque est livré en standard avec une visière.
Note
Veuillez noter que tant que rien d′autre n′est indiqué dans la description de l′article, tous les casques qui ont une visière en standard sont livrés avec une visière claire, même si elle est représentée différemment.Suomy SR-Sport, full face helmet
Article No.: 11040316
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin and produced in 2 sizes (M e L), made by hand using new technologies, which foresee aramidic resins.
INTERNAL POLYSTYRENE protective lining, available in two sizes (M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The SHIELD is thermoformed from a polycarbonate flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
RETENTION SYSTEM D-RING studied and patented by Suomy, it has been studied by milions of end users and it is the best system in the world.
The chin strap has a D-Ring close in Inox steel and button to fix the closure. The button is in an area completely free and allows an easy use even with gloves: when the button is closed , the chin strap creates a loop, which can be used as a ring to pull the tab and undid the closure system.
SR SPORT is homologated as per the rules: ECE 22-05; DOT; JIS; INMETRO NBR 7471
CHEEK PADS completely removable and washable, in different thicknesses for a complete customization of the product.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product.
The internal removable shell has been studied for an uniform stand on the head.
The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
- Wicks sweat away from the body.
- Keeps the user fresh, dry and comfortable.
- Lightweight, soft and breathable fabric.
- Performance verified and certified by ADVANSA.
The innovative rear air intake on the SR SPORT has been designed to further improve ventilation inside the helmet, using residual air flows that, again thanks to the Venturi effect, are able to generate a depression in the lower part of the helmet, in this way ensuring a substantial extraction of the hot air inside it, consequently maintaining a comfortable temperature even at the back of the head (neck).
The ventilation system of SR SPORT, together with the special shape of the internal shell , optimize the outside and inside flows.
Fed by inside air ventilation and using the Venturi effect, they optimize the internal ventilation. The back spoiler has been studied to reduce the helmet vibration. This grants an uniform diffusion of the air flow in the internal part of the shell.
weight: ca 1250gr
Note
Please be aware, as long as nothing else is written in the item description:- All helmets will be delivered only with the ECE certification by default, even if it is shown differently.
- all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.
Accessoires
Pièces de rechange
Produits d'entretien
Avis des clients
As-tu expérimenté l\'article?





















































