Held Karakum Top, tekstiljakke Gore-Tex kvinder

Gore-Tex over & under, Clip-in Technology, HLS-LED ready

Material

• Airguard 500 D
• Breathable mesh lining

Membrane

• Removable Gore-Tex liner with 3-layer technology, can be worn inside or over the jacket for rain protection
• Reflective print

Comfort/Features

• 4 outer and 1 inner pocket, cell phone and document pocket
• Ventilation zippers in front, back and arms
• Arm width adjustment
• Waist belt
• Held Clip-in Technology
• Connecting zipper
• Retrofittable Held Light System (not included)

Protection

• Certified according to EN 17092, protective clothing for motorcyclists
• D3O® T5 EvoProX soft protectors on shoulder and elbow, certified according to EN 1621-1:2012, Level 2
• Retrofittable back protector, certified according to EN 1621-2:2014
• Velcro for retrofittable two-piece chest protector, certified according to EN 1621-3:2018
• Reflective inserts

The over & under Technology

The portable and flexible solution for all weather conditions!

We designed a detachable membrane, which can be worn under or over the main garment. Just detach the Membrane liner from the garment and put it back on over your jacket or trousers.

Highlights

• The Gore-Tex membrane can be worn over or under the base garment.
• Base garment stays dry and clean when worn over it. Body does not cool down while wearing underneath.
• Best possible ventilation when wearing without membrane.
• Membrane jacket and pants can also be used separately as leisure wear.

That's the technology

The Gore Tex membrane is worn in the basic position under the base garment. As jacket or pants it is firmly attached to the base garment by means of zips and push-buttons. In this position, the membrane serves as a windbreak and warms the body. Ideal for dry, cool or changeable conditions. Access to all external and internal pockets is possible without restriction.

In case of prolonged or heavy rain, the Gore Tex inner jacket and pants are removed from the base garment and pulled quickly and easily over the base garment. As a result, the base garment remains dry and clean and the body does not cool down.

If the conditions are dry and warm, the membrane is not worn. Inner jacket and pants are carried separately. The body is optimally ventilated and cooled by the airstream. In addition, the weight of the clothing is reduced and the wearing comfort increased.

Off the road, membrane jacket and pants can also be perfectly worn as functional leisure and / or rainwear. This reduces additional luggage on tour.

The Clip-in Technology

The full flexibility and functionality in every situation.

Wearing the same apparel on hot summer days as in the transition period with single-digit temperatures? No problem with the Held Clip-in technology. All Held jackets and trousers, which are equipped with the Clip-in feature can be retrofitted and upgraded with Held Clip-in products.

On the specially colored fixation loops, the Clip-in products are installed by press-studs into the outer shell.

With the blue colored loops and press-studs, the system is easily distinguishable from other fastening systems of the base garment like connecting zips, air-vents and removable membranes and linings.

The individual Clip-in products can also be worn separately for any non-biking activity as leisure wear.

Highlights

• Extension of functionality and application range of your motorcycle apparel
• Uncomplicated, easy installation into the base garment with press-studs
• Blue color scheme for easy identification
• Clip-in jacket and pants can also be used separately as leisure wear

The HLS Technology

Protection thanks to visibility

With the HLS technology Held brings light into the darkness! The retrofittable Held Light System (HLS) is the latest development from Held to make motorcycling even safer. The luminous LED modules, which are integrated into the protective clothing of the motorcyclist, cause a significantly better visibility of the driver in poor lighting conditions. When riding at night, in fog or in the rain, HLS technology represents a decisive factor in accident prevention. Unlike reflector strips, which can only reflect incident light, the HLS light guides shine independently and permanently - a highlight in the truest sense of the word.

• The heart of the HLS technology is the HLS set. This consists of two white and two red LED modules, each connected with a USB connection cable. To use the HLS set, a compatible Held jacket or safety vest, with the feature " LED Prepared" and a commercially available battery pack (power bank) are required as a power source.
• The installation of the HLS is done in a few simple steps: The LED set is inserted into the jacket or vest through the open zipper in the back compartment. Then the ends of the white light guides are inserted into the respective openings in the chest area of the garment from the inside and pushed completely through the mesh fabric tube. In the same way, the red light guides are threaded into the back area of the jacket or vest.
• After all four LED modules are placed in their designated locations, the USB cable is threaded through the cable grommet of the jacket or safety vest. Now the system is ready for use and can be switched on at any time by connecting the battery pack or switched off by disconnecting it.

Highlights

• Actively illuminated LED system for better visibility of the motorcyclist in the dark and in poor visibility conditions
• High quality OSRAM bulbs with white light at the front and red light at the back
• Can be integrated into all Held "LED Prepared" products
• Powered by any commercially available battery pack via USB connection
• Operating time with a 4,000 mAh battery pack approx. 7 hours