|
|
|
To shopping cart Shopping Cart 0 article

You do not have any products in your shopping cart yet.

 
Order now and save
your additional freebie!

Over 145,000 articles and attractive offers

Secure payment
Secured by SSL encryption

100 days return and
money back guarantee

Arai MX-V Barcia, cross helmet

The MX-V evolved from the much loved VX-3 model. Years of experience can be found in this ultimate off road helmet. The perfect choice for MX, Enduro and Off-road use. Just as found in every Arai helmet, the basic and simple organic shell shape is based on the R75 Shape concept. The absence of exaggerated edges or protrusions on the shell is not a lack of creativity, but a commitment to maintaining the integrity of the shell with real world impact performance.

MX-V: Ventilation

Easy to clean diffusers create a strong venture vacuum at the rear. Centre top vent for increased airflow. Under-peak air intake collects and directs cool air into the helmet. Inner chin vent shutter prevents debris coming into the helmet in dusty riding conditions. Goggle ventilation and lower side vents.

Shell Construction: SCLC

Super Complex Laminate Construction The latest aerospace fibres, with 30% more strength in extension & bending resistance than standard fiberglass comprises the majority of the SCLC shell. While considerably more expensive than most fiberglass (and in fact more than many Carbon Fibre materials), this “Super Fibre” provides incredible flexibility and strength, which maximizes shell integrity. A specially designed “mechanically expanded fibre mat,” sandwiched between the inner and outer layers of Arai´s proprietary Super Fibre Laminates, is used to reinforce and bond these two Super Fibre layers without adding significant weight to the helmet.

Front Ventilation: Center top vent

The new Top Vent provides 11% more airflow than the previous Vent. The new bigger switch makes opening and closing easier. The new Top Vent has three positions; closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed.

Inner chin (bar) vent shutter

Open and close the chin bar vents from the inside to prevent debris coming into the helmet in dusty riding conditions.

Rear Ventilation: Removable three-piece rear exhaust

Creates a tremendous amount of venturi vacuum at the rear. Can be easily removed (for cleaning) or replacement.

Rear Ventilation: Side exhausts

Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance.

Interior: Dry-Cool® Liner

Arai´s Dry-Cool® material transfers heat and moisture away from the rider quickly and efficiently.

Interior: Replaceable Cheek pads/Ear cups

Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

Interior: Replaceable Interior

Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

Interior: Replaceable Chinstrap covers

Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

Interior: Replaceable Neckroll

Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

Interior: Facial Contour System (FCS)

To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure.

Interior: 5mm ’’Peel Away’’ Ear cups/Cheek pads

Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed.

Comfort: Emergency Release System (ERS)

Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury.

Comfort: Breath guard

Works in conjunction with the dual-pivot® chin vent to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down and away from the inside surface of the shield.

Comfort: Dirt removal

The elongated and rounded peak helps protect the rider from mud or other objects. The flow-through vent ducts and removable rear vent cowls also allow you to remove dirt easily.

Approval: ECE 22-05

The most common helmet certification internationally, required by over 50 countries worldwide.

Five times inspected

Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections.

Washable interior

The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water.

Handmade

It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours.

All-day comfort

All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai.

Double-D ring device

The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener.

Smooth shape, better protection

The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact.

Hard outer shell, soft inner shell

Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component.

Organic shape

The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape for improved comfort, fit and to help minimize wind turbulence.

5-year limited warranty

All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture.

Different outer shells

Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for.

Arai In-house test

This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.

Customer reviews

5 of 5 stars (1 review)

John

Posted by Smithg636 1 18.09.2018

Fits 3 sizes larger

I loved your post.Much thanks again. afeeegaddddefgde

Write Evaluation

Bestseller

Icon Variant Battlescar, enduro helmet

Icon Variant Battlescar, enduro helmet

RRP $ 561.3736% saved$ 357.64
ONeal 2Series RL S18 Spyde, cross helmet

ONeal 2Series RL S18 Spyde, cross helmet

$ 134.94
Acerbis Active, enduro helmet

Acerbis Active, enduro helmet

RRP $ 168.6952% savedfrom $ 81.42



Customers who bought this product also bought the following products:

MT-Gear Snipe, kidney belt

MT-Gear Snipe, kidney belt

$ 13.44
1 x 'MT-Gear Snipe, kidney belt' order
 
Kappa Motorcycle, first aid bag

Kappa Motorcycle, first aid bag

$ 11.14
1 x 'Kappa Motorcycle, first aid bag' order
 
Held Mini Pack, backpack

Held Mini Pack, backpack

$ 16.82
1 x 'Held Mini Pack, backpack' order
 

You have questions?

Call us. We'll help you: +49 241 4125990 (Mon-Thu: 9.00 am - 6.00 pm, Fri: 9.00 am - 1.00 pm)

Over 145,000 articles
and attractive offers

Secure payment with SSL encryption

100 days return
and money back guarantee

Motorcycle accessories and motorcycle apparel with up to 50% discount. Expert Support - phone or e-mail. Highest quality (EC-approved standard helmets). Wide range of products from renowned manufacturers. In our shop you will find flip-up helmets, open face helmets, integral helmets and cross helmets.

Unforeseeable delivery bottlenecks with manufacturers or distributors, price adjustments, mistakes and subject to prior sale reserved. All data for the availability and technical equipment take place without guarantee. Changes of the scope of supply on the manufacturer's part reserved.

Motorrad-News-Blog | Motorcycle Accessories Price Comparison
© motoin GmbH · Germany - Your online shop for motorcycle clothing

In order to give you a better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.
More about data protection »